Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta

More Options

• Similar
• Submit Audit
• Compare

// SPDX-License-Identifier: MIT

pragma solidity 0.8.26;

import {IERC20} from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import {SafeERC20} from "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import {IBorrowerOperations} from "src/interfaces/core/IBorrowerOperations.sol";
import {IMetaCore} from "src/interfaces/core/IMetaCore.sol";
import {IPositionManager} from "src/interfaces/core/IPositionManager.sol";
import {ILSTCollateralVault} from "src/interfaces/core/vaults/ILSTCollateralVault.sol";

/// @dev Doesn't have DelegatedOps functionality
/// @dev Periphery whitelisted in Core, delegates BorrowerOperations accounts
contract CollVaultRouter {
    using SafeERC20 for IERC20;

    IBorrowerOperations immutable borrowerOperations;
    IMetaCore immutable metaCore;

    modifier onlyOwner() {
        require(msg.sender == metaCore.owner(), "CollVaultRouter: Only owner");
        _;
    }

    constructor(
        address _borrowerOperations,
        address _metaCore
    ) {
        if (_borrowerOperations == address(0) || _metaCore == address(0)) {
            revert("CollVaultRouter: 0 address");
        }

        borrowerOperations = IBorrowerOperations(_borrowerOperations);
        metaCore = IMetaCore(_metaCore);
    }


    function claimCollateralRouter(
        IPositionManager positionManager,
        ILSTCollateralVault collVault,
        address receiver,
        uint _collIndex,
        uint minAssetsWithdrawn
    ) external {
        _validateVaultAndManager(collVault, _collIndex, positionManager);

        uint surplusBalance = positionManager.surplusBalances(msg.sender);

        positionManager.claimCollateral(msg.sender, address(this));

        uint assetsWithdrawn = collVault.redeem(surplusBalance, receiver, address(this));
        require(assetsWithdrawn >= minAssetsWithdrawn, "assetsWithdrawn < _minAssetsWithdrawn");
    }

    function claimLockedTokens(IERC20[] memory tokens, uint[] memory amounts) external {
        require(msg.sender == metaCore.owner(), "Only owner");

        for (uint i; i < tokens.length; i++) {
            if (address(tokens[i]) == address(0xdead)) {
                (bool success,) = metaCore.feeReceiver().call{value: amounts[i]}("");
                require(success, "ETH transfer failed");
            } else {
                tokens[i].safeTransfer(metaCore.feeReceiver(), amounts[i]);
            }
        }
    }

    function _isWhitelistedCollateralAt(address positionManagerAtIdx, address collVault) private view returns (bool) {
        return IPositionManager(positionManagerAtIdx).collateralToken() == collVault;
    }

    function _validateVaultAndManager(
        ILSTCollateralVault collVault,
        uint _collIndex,
        IPositionManager positionManager
    ) internal view returns(IERC20 vaultAsset) {
        address positionManagerAtIdx = borrowerOperations.positionManagers(_collIndex);
        require(positionManagerAtIdx == address(positionManager), "Incorrect PositionManager");
        require(_isWhitelistedCollateralAt(positionManagerAtIdx, address(collVault)), "Incorrect collateral");
        require(address(positionManager.collateralToken()) == address(collVault), "Incorrect PositionManager or Vault");
        vaultAsset = IERC20(collVault.asset());
    }

    receive() external payable {}
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 amount
    ) external returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (token/ERC20/utils/SafeERC20.sol)

pragma solidity ^0.8.0;

import "../IERC20.sol";
import "../extensions/draft-IERC20Permit.sol";
import "../../../utils/Address.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using Address for address;

    function safeTransfer(
        IERC20 token,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    function safeTransferFrom(
        IERC20 token,
        address from,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        require(
            (value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    function safeIncreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        uint256 newAllowance = token.allowance(address(this), spender) + value;
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    function safeDecreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        unchecked {
            uint256 oldAllowance = token.allowance(address(this), spender);
            require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
            uint256 newAllowance = oldAllowance - value;
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
        }
    }

    function safePermit(
        IERC20Permit token,
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal {
        uint256 nonceBefore = token.nonces(owner);
        token.permit(owner, spender, value, deadline, v, r, s);
        uint256 nonceAfter = token.nonces(owner);
        require(nonceAfter == nonceBefore + 1, "SafeERC20: permit did not succeed");
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address-functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        if (returndata.length > 0) {
            // Return data is optional
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}

// SPDX-License-Identifier: MIT

pragma solidity 0.8.26;

import {ICore} from "./ICore.sol";

interface IBorrowerOperations {
    struct Balances {
        uint256[] collaterals;
        uint256[] debts;
        uint256[] prices;
    }

    event BorrowingFeePaid(address indexed borrower, uint256 amount);
    event CollateralConfigured(address positionManager, address collateralToken);
    event PositionCreated(address indexed _borrower, uint256 arrayIndex);
    event PositionManagerRemoved(address positionManager);
    event PositionUpdated(address indexed _borrower, uint256 _debt, uint256 _coll, uint256 stake, uint8 operation);

    function addColl(
        address positionManager,
        address account,
        uint256 _collateralAmount,
        address _upperHint,
        address _lowerHint
    ) external;

    function adjustPosition(
        address positionManager,
        address account,
        uint256 _maxFeePercentage,
        uint256 _collDeposit,
        uint256 _collWithdrawal,
        uint256 _debtChange,
        bool _isDebtIncrease,
        address _upperHint,
        address _lowerHint
    ) external;

    function closePosition(address positionManager, address account) external;

    function configureCollateral(address positionManager, address collateralToken) external;

    function fetchBalances() external view returns (Balances memory balances);

    function getGlobalSystemBalances() external view returns (uint256 totalPricedCollateral, uint256 totalDebt);

    function getTCR() external view returns (uint256 globalTotalCollateralRatio);

    function openPosition(
        address positionManager,
        address account,
        uint256 _maxFeePercentage,
        uint256 _collateralAmount,
        uint256 _debtAmount,
        address _upperHint,
        address _lowerHint
    ) external;

    function removePositionManager(address positionManager) external;

    function repayDebt(
        address positionManager,
        address account,
        uint256 _debtAmount,
        address _upperHint,
        address _lowerHint
    ) external;

    function setDelegateApproval(address _delegate, bool _isApproved) external;

    function setMinNetDebt(uint256 _minNetDebt) external;

    function withdrawColl(
        address positionManager,
        address account,
        uint256 _collWithdrawal,
        address _upperHint,
        address _lowerHint
    ) external;

    function withdrawDebt(
        address positionManager,
        address account,
        uint256 _maxFeePercentage,
        uint256 _debtAmount,
        address _upperHint,
        address _lowerHint
    ) external;

    function positionManagers(uint256) external view returns (address);

    function checkRecoveryMode(uint256 TCR) external view returns (bool);

    function DEBT_GAS_COMPENSATION() external view returns (uint256);

    function DECIMAL_PRECISION() external view returns (uint256);

    function PERCENT_DIVISOR() external view returns (uint256);

    function CORE() external view returns (ICore);

    function debtToken() external view returns (address);

    function factory() external view returns (address);

    function getCompositeDebt(uint256 _debt) external view returns (uint256);

    function guardian() external view returns (address);

    function isApprovedDelegate(address owner, address caller) external view returns (bool isApproved);

    function minNetDebt() external view returns (uint256);

    function owner() external view returns (address);

    function positionManagersData(address) external view returns (address collateralToken, uint16 index);
}

// SPDX-License-Identifier: MIT

pragma solidity 0.8.26;

interface IMetaCore {
    // ---------------------------------
    // Structures
    // ---------------------------------
    struct FeeInfo {
        bool existsForDebtToken;
        uint16 debtTokenFee;
    }

    struct RebalancerFeeInfo {
        bool exists;
        uint16 entryFee;
        uint16 exitFee;
    }

    // ---------------------------------
    // Public constants
    // ---------------------------------
    function OWNERSHIP_TRANSFER_DELAY() external view returns (uint256);
    function DEFAULT_FLASH_LOAN_FEE() external view returns (uint16);

    // ---------------------------------
    // Public state variables
    // ---------------------------------
    function debtToken() external view returns (address);
    function lspEntryFee() external view returns (uint16);
    function lspExitFee() external view returns (uint16);
    function interestProtocolShare() external view returns (uint16);
    /// @dev Default interest receiver for all PositionManagers, unless overriden in the respective PM
    function defaultInterestReceiver() external view returns (address);

    function feeReceiver() external view returns (address);
    function priceFeed() external view returns (address);
    function owner() external view returns (address);
    function pendingOwner() external view returns (address);
    function ownershipTransferDeadline() external view returns (uint256);
    function guardian() external view returns (address);
    function paused() external view returns (bool);
    function lspBootstrapPeriod() external view returns (uint64);

    // ---------------------------------
    // External functions
    // ---------------------------------
    function setFeeReceiver(address _feeReceiver) external;
    function setPriceFeed(address _priceFeed) external;
    function setGuardian(address _guardian) external;

    /**
     * @notice Global pause/unpause
     *         Pausing halts new deposits/borrowing across the protocol
     */
    function setPaused(bool _paused) external;

    /**
     * @notice Extend or change the LSP bootstrap period,
     *         after which certain protocol mechanics change
     */
    function setLspBootstrapPeriod(uint64 _bootstrapPeriod) external;

    /**
     * @notice Set a custom flash-loan fee for a given periphery contract
     * @param _periphery Target contract that will get this custom fee
     * @param _debtTokenFee Fee in basis points (bp)
     * @param _existsForDebtToken Whether this custom fee is used when the caller = `debtToken`
     */
    function setPeripheryFlashLoanFee(address _periphery, uint16 _debtTokenFee, bool _existsForDebtToken) external;

    /**
     * @notice Begin the ownership transfer process
     * @param newOwner The address proposed to be the new owner
     */
    function commitTransferOwnership(address newOwner) external;

    /**
     * @notice Finish the ownership transfer, after the mandatory delay
     */
    function acceptTransferOwnership() external;

    /**
     * @notice Revoke a pending ownership transfer
     */
    function revokeTransferOwnership() external;

    /**
     * @notice Look up a custom flash-loan fee for a specific periphery contract
     * @param peripheryContract The contract that might have a custom fee
     * @return The flash-loan fee in basis points
     */
    function getPeripheryFlashLoanFee(address peripheryContract) external view returns (uint16);

    /**
     * @notice Set / override entry & exit fees for a special rebalancer contract
     */
    function setRebalancerFee(address _rebalancer, uint16 _entryFee, uint16 _exitFee) external;

    /**
     * @notice Set the LSP entry fee globally
     * @param _fee Fee in basis points
     */
    function setEntryFee(uint16 _fee) external;

    /**
     * @notice Set the LSP exit fee globally
     * @param _fee Fee in basis points
     */
    function setExitFee(uint16 _fee) external;

    /**
     * @notice Set the interest protocol share globally to all PositionManagers
     * @param _interestProtocolShare Share in basis points
     */
    function setInterestProtocolShare(uint16 _interestProtocolShare) external;

    /**
     * @notice Look up the LSP entry fee for a rebalancer
     * @param rebalancer Possibly has a special fee
     * @return The entry fee in basis points
     */
    function getLspEntryFee(address rebalancer) external view returns (uint16);

    /**
     * @notice Look up the LSP exit fee for a rebalancer
     * @param rebalancer Possibly has a special fee
     * @return The exit fee in basis points
     */
    function getLspExitFee(address rebalancer) external view returns (uint16);

    // ---------------------------------
    // Events
    // ---------------------------------
    event NewOwnerCommitted(address indexed owner, address indexed pendingOwner, uint256 deadline);
    event NewOwnerAccepted(address indexed oldOwner, address indexed newOwner);
    event NewOwnerRevoked(address indexed owner, address indexed revokedOwner);

    event FeeReceiverSet(address indexed feeReceiver);
    event PriceFeedSet(address indexed priceFeed);
    event GuardianSet(address indexed guardian);
    event PeripheryFlashLoanFee(address indexed periphery, uint16 debtTokenFee);
    event LSPBootstrapPeriodSet(uint64 bootstrapPeriod);
    event RebalancerFees(address indexed rebalancer, uint16 entryFee, uint16 exitFee);
    event EntryFeeSet(uint16 fee);
    event ExitFeeSet(uint16 fee);
    event InterestProtocolShareSet(uint16 interestProtocolShare);
    event DefaultInterestReceiverSet(address indexed defaultInterestReceiver);
    event Paused();
    event Unpaused();
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import {IERC3156FlashBorrower} from "@openzeppelin/contracts/interfaces/IERC3156FlashBorrower.sol";
import {IERC20} from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import {IFactory} from "./IFactory.sol";

interface IPositionManager {
    event BaseRateUpdated(uint256 _baseRate);
    event CollateralSent(address _to, uint256 _amount);
    event LTermsUpdated(uint256 _L_collateral, uint256 _L_debt);
    event LastFeeOpTimeUpdated(uint256 _lastFeeOpTime);
    event Redemption(
        address indexed _redeemer,
        uint256 _attemptedDebtAmount,
        uint256 _actualDebtAmount,
        uint256 _collateralSent,
        uint256 _collateralFee
    );
    event SystemSnapshotsUpdated(uint256 _totalStakesSnapshot, uint256 _totalCollateralSnapshot);
    event TotalStakesUpdated(uint256 _newTotalStakes);
    event PositionIndexUpdated(address _borrower, uint256 _newIndex);
    event PositionSnapshotsUpdated(uint256 _L_collateral, uint256 _L_debt);
    event PositionUpdated(address indexed _borrower, uint256 _debt, uint256 _coll, uint256 _stake, uint8 _operation);

    function addCollateralSurplus(address borrower, uint256 collSurplus) external;

    function applyPendingRewards(address _borrower) external returns (uint256 coll, uint256 debt);

    function claimCollateral(address borrower, address _receiver) external;

    function closePosition(address _borrower, address _receiver, uint256 collAmount, uint256 debtAmount) external;

    function closePositionByLiquidation(address _borrower) external;

    function setCollVaultRouter(address _collVaultRouter) external;

    function collectInterests() external;

    function decayBaseRateAndGetBorrowingFee(uint256 _debt) external returns (uint256);

    function decreaseDebtAndSendCollateral(address account, uint256 debt, uint256 coll) external;

    function fetchPrice() external view returns (uint256);

    function finalizeLiquidation(
        address _liquidator,
        uint256 _debt,
        uint256 _coll,
        uint256 _collSurplus,
        uint256 _debtGasComp,
        uint256 _collGasComp
    ) external;

    function getEntireSystemBalances() external view returns (uint256, uint256, uint256);

    function movePendingPositionRewardsToActiveBalances(uint256 _debt, uint256 _collateral) external;

    function openPosition(
        address _borrower,
        uint256 _collateralAmount,
        uint256 _compositeDebt,
        uint256 NICR,
        address _upperHint,
        address _lowerHint
    ) external returns (uint256 stake, uint256 arrayIndex);

    function redeemCollateral(
        uint256 _debtAmount,
        address _firstRedemptionHint,
        address _upperPartialRedemptionHint,
        address _lowerPartialRedemptionHint,
        uint256 _partialRedemptionHintNICR,
        uint256 _maxIterations,
        uint256 _maxFeePercentage
    ) external;

    function setAddresses(address _priceFeedAddress, address _sortedPositionsAddress, address _collateralToken) external;

    function setParameters(
        IFactory.DeploymentParams calldata _params
    ) external;

    function setPaused(bool _paused) external;

    function setPriceFeed(address _priceFeedAddress) external;

    function startSunset() external;

    function updateBalances() external;

    function updatePositionFromAdjustment(
        bool _isDebtIncrease,
        uint256 _debtChange,
        uint256 _netDebtChange,
        bool _isCollIncrease,
        uint256 _collChange,
        address _upperHint,
        address _lowerHint,
        address _borrower,
        address _receiver
    ) external returns (uint256, uint256, uint256);

    function DEBT_GAS_COMPENSATION() external view returns (uint256);

    function DECIMAL_PRECISION() external view returns (uint256);

    function L_collateral() external view returns (uint256);

    function L_debt() external view returns (uint256);

    function MCR() external view returns (uint256);

    function PERCENT_DIVISOR() external view returns (uint256);

    function CORE() external view returns (address);

    function SUNSETTING_INTEREST_RATE() external view returns (uint256);

    function Positions(
        address
    )
        external
        view
        returns (
            uint256 debt,
            uint256 coll,
            uint256 stake,
            uint8 status,
            uint128 arrayIndex,
            uint256 activeInterestIndex
        );

    function activeInterestIndex() external view returns (uint256);

    function baseRate() external view returns (uint256);

    function borrowerOperations() external view returns (address);

    function borrowingFeeFloor() external view returns (uint256);

    function collateralToken() external view returns (address);

    function debtToken() external view returns (address);

    function collVaultRouter() external view returns (address);

    function defaultedCollateral() external view returns (uint256);

    function defaultedDebt() external view returns (uint256);

    function getBorrowingFee(uint256 _debt) external view returns (uint256);

    function getBorrowingFeeWithDecay(uint256 _debt) external view returns (uint256);

    function getBorrowingRate() external view returns (uint256);

    function getBorrowingRateWithDecay() external view returns (uint256);

    function getCurrentICR(address _borrower, uint256 _price) external view returns (uint256);

    function getEntireDebtAndColl(
        address _borrower
    ) external view returns (uint256 debt, uint256 coll, uint256 pendingDebtReward, uint256 pendingCollateralReward);

    function getEntireSystemColl() external view returns (uint256);

    function getEntireSystemDebt() external view returns (uint256);

    function getNominalICR(address _borrower) external view returns (uint256);

    function getPendingCollAndDebtRewards(address _borrower) external view returns (uint256, uint256);

    function getRedemptionFeeWithDecay(uint256 _collateralDrawn) external view returns (uint256);

    function getRedemptionRate() external view returns (uint256);

    function getRedemptionRateWithDecay() external view returns (uint256);

    function getTotalActiveCollateral() external view returns (uint256);

    function getTotalActiveDebt() external view returns (uint256);

    function getPositionCollAndDebt(address _borrower) external view returns (uint256 coll, uint256 debt);

    function getPositionFromPositionOwnersArray(uint256 _index) external view returns (address);

    function getPositionOwnersCount() external view returns (uint256);

    function getPositionStake(address _borrower) external view returns (uint256);

    function getPositionStatus(address _borrower) external view returns (uint256);

    function guardian() external view returns (address);

    function hasPendingRewards(address _borrower) external view returns (bool);

    function interestPayable() external view returns (uint256);

    function interestRate() external view returns (uint256);

    function lastActiveIndexUpdate() external view returns (uint256);

    function lastCollateralError_Redistribution() external view returns (uint256);

    function lastDebtError_Redistribution() external view returns (uint256);

    function lastFeeOperationTime() external view returns (uint256);

    function liquidationManager() external view returns (address);

    function maxBorrowingFee() external view returns (uint256);

    function maxRedemptionFee() external view returns (uint256);

    function maxSystemDebt() external view returns (uint256);

    function minuteDecayFactor() external view returns (uint256);

    function owner() external view returns (address);

    function paused() external view returns (bool);

    function priceFeed() external view returns (address);

    function redemptionFeeFloor() external view returns (uint256);

    function rewardSnapshots(address) external view returns (uint256 collateral, uint256 debt);

    function sortedPositions() external view returns (address);

    function sunsetting() external view returns (bool);

    function surplusBalances(address) external view returns (uint256);

    function systemDeploymentTime() external view returns (uint256);

    function totalCollateralSnapshot() external view returns (uint256);

    function totalStakes() external view returns (uint256);

    function totalStakesSnapshot() external view returns (uint256);
}

// SPDX-License-Identifier: MIT

pragma solidity 0.8.26;

import {IERC20} from "@openzeppelin/contracts/interfaces/IERC20.sol";
import {EnumerableSet} from "@openzeppelin/contracts/utils/structs/EnumerableSet.sol";
import {IBaseCollateralVault} from "./IBaseCollateralVault.sol";
import {ILSTWrapper} from "./ILSTWrapper.sol";
import {ILSTVault} from "../../utils/integrations/ILSTVault.sol";
import {EmissionsLib} from "src/libraries/EmissionsLib.sol";

interface ILSTCollateralVault is IBaseCollateralVault {
    struct LSTCollVaultStorage {
        uint16 minPerformanceFee;
        uint16 maxPerformanceFee;
        uint16 performanceFee; // over yield, in basis points
        /// @dev We currently don't know the lstVault implementation, but if it were to be possible for them to remove tokens from the rewardTokens
        /// There would be no need to remove it from here since the amounts should continue being accounted for in the virtual balance
        EnumerableSet.AddressSet rewardedTokens;

        ILSTVault _lstVault;
        address mainRewardTokenVault;
        address mainRewardToken;
        ILSTWrapper lstWrapper;
        uint96 lastUpdate;

        mapping(address tokenIn => uint) threshold;
    }

    struct LSTInitParams {
        BaseInitParams _baseParams;
        uint16 _minPerformanceFee;
        uint16 _maxPerformanceFee;
        uint16 _performanceFee; // over yield, in basis points
        ILSTVault _lstVault;
        address _mainRewardTokenVault;
        address _lstWrapper;
    }

    struct RebalanceParams {
        address sentCurrency; 
        uint sentAmount; 
        address swapper;
        bytes payload;
    }

    function rebalance(RebalanceParams calldata p) external;

    function pullRewards() external;

    function setUnlockRatePerSecond(address token, uint64 _unlockRatePerSecond) external;

    function internalizeDonations(address[] memory tokens, uint128[] memory amounts) external;

    function setPairThreshold(address tokenIn, uint thresholdInBP) external;

    function setPerformanceFee(uint16 _performanceFee) external;
    function setWithdrawFee(uint16 _withdrawFee) external;

    function getBalance(address token) external view returns (uint);

    function getBalanceOfWithFutureEmissions(address token) external view returns (uint);

    function getFullProfitUnlockTimestamp(address token) external view returns (uint);

    function unlockRatePerSecond(address token) external view returns (uint);

    function getLockedEmissions(address token) external view returns (uint);

    function getPerformanceFee() external view returns (uint16);


    function rewardedTokens() external view returns (address[] memory);

    function lstVault() external view returns (ILSTVault);

    function mainRewardToken() external view returns (address);

    function mainRewardTokenVault() external view returns (address);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/draft-IERC20Permit.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 */
interface IERC20Permit {
    /**
     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
     * given ``owner``'s signed approval.
     *
     * IMPORTANT: The same issues {IERC20-approve} has related to transaction
     * ordering also apply here.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     *
     * For more information on the signature format, see the
     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
     * section].
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;

    /**
     * @dev Returns the current nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256);

    /**
     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/Address.sol)

pragma solidity ^0.8.1;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.

        return account.code.length > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
     * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
     *
     * _Available since v4.8._
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        if (success) {
            if (returndata.length == 0) {
                // only check isContract if the call was successful and the return data is empty
                // otherwise we already know that it was a contract
                require(isContract(target), "Address: call to non-contract");
            }
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    /**
     * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason or using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    function _revert(bytes memory returndata, string memory errorMessage) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert(errorMessage);
        }
    }
}

// SPDX-License-Identifier: MIT

pragma solidity 0.8.26;

import {IMetaCore} from "src/interfaces/core/IMetaCore.sol";

interface ICore {

    // --- Public variables ---
    function metaCore() external view returns (IMetaCore);
    function startTime() external view returns (uint256);
    function CCR() external view returns (uint256);
    function dmBootstrapPeriod() external view returns (uint64);
    function isPeriphery(address peripheryContract) external view returns (bool);

    // --- External functions ---

    function setPeripheryEnabled(address _periphery, bool _enabled) external;
    function setPMBootstrapPeriod(address dm, uint64 _bootstrapPeriod) external;
    function setNewCCR(uint256 _CCR) external;

    function priceFeed() external view returns (address);
    function owner() external view returns (address);
    function pendingOwner() external view returns (address);
    function guardian() external view returns (address);
    function feeReceiver() external view returns (address);
    function paused() external view returns (bool);
    function lspBootstrapPeriod() external view returns (uint64);
    function getLspEntryFee(address rebalancer) external view returns (uint16);
    function getLspExitFee(address rebalancer) external view returns (uint16);
    function interestProtocolShare() external view returns (uint16);
    function defaultInterestReceiver() external view returns (address);

    // --- Events ---
    event CCRSet(uint256 initialCCR);
    event PMBootstrapPeriodSet(address dm, uint64 bootstrapPeriod);
    event PeripheryEnabled(address indexed periphery, bool enabled);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (interfaces/IERC3156FlashBorrower.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC3156 FlashBorrower, as defined in
 * https://eips.ethereum.org/EIPS/eip-3156[ERC-3156].
 *
 * _Available since v4.1._
 */
interface IERC3156FlashBorrower {
    /**
     * @dev Receive a flash loan.
     * @param initiator The initiator of the loan.
     * @param token The loan currency.
     * @param amount The amount of tokens lent.
     * @param fee The additional amount of tokens to repay.
     * @param data Arbitrary data structure, intended to contain user-defined parameters.
     * @return The keccak256 hash of "IERC3156FlashBorrower.onFlashLoan"
     */
    function onFlashLoan(
        address initiator,
        address token,
        uint256 amount,
        uint256 fee,
        bytes calldata data
    ) external returns (bytes32);
}

// SPDX-License-Identifier: MIT

pragma solidity 0.8.26;

interface IFactory {
    // commented values are suggested default parameters
    struct DeploymentParams {
        uint256 minuteDecayFactor; // 999037758833783000  (half life of 12 hours)
        uint256 redemptionFeeFloor; // 1e18 / 1000 * 5  (0.5%)
        uint256 maxRedemptionFee; // 1e18  (100%)
        uint256 borrowingFeeFloor; // 1e18 / 1000 * 5  (0.5%)
        uint256 maxBorrowingFee; // 1e18 / 100 * 5  (5%)
        uint256 interestRateInBps; // 100 (1%)
        uint256 maxDebt;
        uint256 MCR; // 12 * 1e17  (120%)
        address collVaultRouter; // set to address(0) if PositionManager coll is not CollateralVault
    }

    event NewDeployment(address collateral, address priceFeed, address positionManager, address sortedPositions);

    function deployNewInstance(
        address collateral,
        address priceFeed,
        address customPositionManagerImpl,
        address customSortedPositionsImpl,
        DeploymentParams calldata params,
        uint64 unlockRatePerSecond,
        bool forceThroughLspBalanceCheck
    ) external;

    function setImplementations(address _positionManagerImpl, address _sortedPositionsImpl) external;

    function CORE() external view returns (address);

    function borrowerOperations() external view returns (address);

    function debtToken() external view returns (address);

    function guardian() external view returns (address);

    function liquidationManager() external view returns (address);

    function owner() external view returns (address);

    function sortedPositionsImpl() external view returns (address);

    function liquidStabilityPool() external view returns (address);

    function positionManagerCount() external view returns (uint256);

    function positionManagerImpl() external view returns (address);

    function positionManagers(uint256) external view returns (address);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (interfaces/IERC20.sol)

pragma solidity ^0.8.0;

import "../token/ERC20/IERC20.sol";

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/structs/EnumerableSet.sol)
// This file was procedurally generated from scripts/generate/templates/EnumerableSet.js.

pragma solidity ^0.8.0;

/**
 * @dev Library for managing
 * https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive
 * types.
 *
 * Sets have the following properties:
 *
 * - Elements are added, removed, and checked for existence in constant time
 * (O(1)).
 * - Elements are enumerated in O(n). No guarantees are made on the ordering.
 *
 * ```
 * contract Example {
 *     // Add the library methods
 *     using EnumerableSet for EnumerableSet.AddressSet;
 *
 *     // Declare a set state variable
 *     EnumerableSet.AddressSet private mySet;
 * }
 * ```
 *
 * As of v3.3.0, sets of type `bytes32` (`Bytes32Set`), `address` (`AddressSet`)
 * and `uint256` (`UintSet`) are supported.
 *
 * [WARNING]
 * ====
 * Trying to delete such a structure from storage will likely result in data corruption, rendering the structure
 * unusable.
 * See https://github.com/ethereum/solidity/pull/11843[ethereum/solidity#11843] for more info.
 *
 * In order to clean an EnumerableSet, you can either remove all elements one by one or create a fresh instance using an
 * array of EnumerableSet.
 * ====
 */
library EnumerableSet {
    // To implement this library for multiple types with as little code
    // repetition as possible, we write it in terms of a generic Set type with
    // bytes32 values.
    // The Set implementation uses private functions, and user-facing
    // implementations (such as AddressSet) are just wrappers around the
    // underlying Set.
    // This means that we can only create new EnumerableSets for types that fit
    // in bytes32.

    struct Set {
        // Storage of set values
        bytes32[] _values;
        // Position of the value in the `values` array, plus 1 because index 0
        // means a value is not in the set.
        mapping(bytes32 => uint256) _indexes;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function _add(Set storage set, bytes32 value) private returns (bool) {
        if (!_contains(set, value)) {
            set._values.push(value);
            // The value is stored at length-1, but we add 1 to all indexes
            // and use 0 as a sentinel value
            set._indexes[value] = set._values.length;
            return true;
        } else {
            return false;
        }
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function _remove(Set storage set, bytes32 value) private returns (bool) {
        // We read and store the value's index to prevent multiple reads from the same storage slot
        uint256 valueIndex = set._indexes[value];

        if (valueIndex != 0) {
            // Equivalent to contains(set, value)
            // To delete an element from the _values array in O(1), we swap the element to delete with the last one in
            // the array, and then remove the last element (sometimes called as 'swap and pop').
            // This modifies the order of the array, as noted in {at}.

            uint256 toDeleteIndex = valueIndex - 1;
            uint256 lastIndex = set._values.length - 1;

            if (lastIndex != toDeleteIndex) {
                bytes32 lastValue = set._values[lastIndex];

                // Move the last value to the index where the value to delete is
                set._values[toDeleteIndex] = lastValue;
                // Update the index for the moved value
                set._indexes[lastValue] = valueIndex; // Replace lastValue's index to valueIndex
            }

            // Delete the slot where the moved value was stored
            set._values.pop();

            // Delete the index for the deleted slot
            delete set._indexes[value];

            return true;
        } else {
            return false;
        }
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function _contains(Set storage set, bytes32 value) private view returns (bool) {
        return set._indexes[value] != 0;
    }

    /**
     * @dev Returns the number of values on the set. O(1).
     */
    function _length(Set storage set) private view returns (uint256) {
        return set._values.length;
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function _at(Set storage set, uint256 index) private view returns (bytes32) {
        return set._values[index];
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function _values(Set storage set) private view returns (bytes32[] memory) {
        return set._values;
    }

    // Bytes32Set

    struct Bytes32Set {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(Bytes32Set storage set, bytes32 value) internal returns (bool) {
        return _add(set._inner, value);
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(Bytes32Set storage set, bytes32 value) internal returns (bool) {
        return _remove(set._inner, value);
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(Bytes32Set storage set, bytes32 value) internal view returns (bool) {
        return _contains(set._inner, value);
    }

    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(Bytes32Set storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(Bytes32Set storage set, uint256 index) internal view returns (bytes32) {
        return _at(set._inner, index);
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(Bytes32Set storage set) internal view returns (bytes32[] memory) {
        bytes32[] memory store = _values(set._inner);
        bytes32[] memory result;

        /// @solidity memory-safe-assembly
        assembly {
            result := store
        }

        return result;
    }

    // AddressSet

    struct AddressSet {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(AddressSet storage set, address value) internal returns (bool) {
        return _add(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(AddressSet storage set, address value) internal returns (bool) {
        return _remove(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(AddressSet storage set, address value) internal view returns (bool) {
        return _contains(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(AddressSet storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(AddressSet storage set, uint256 index) internal view returns (address) {
        return address(uint160(uint256(_at(set._inner, index))));
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(AddressSet storage set) internal view returns (address[] memory) {
        bytes32[] memory store = _values(set._inner);
        address[] memory result;

        /// @solidity memory-safe-assembly
        assembly {
            result := store
        }

        return result;
    }

    // UintSet

    struct UintSet {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(UintSet storage set, uint256 value) internal returns (bool) {
        return _add(set._inner, bytes32(value));
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(UintSet storage set, uint256 value) internal returns (bool) {
        return _remove(set._inner, bytes32(value));
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(UintSet storage set, uint256 value) internal view returns (bool) {
        return _contains(set._inner, bytes32(value));
    }

    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(UintSet storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(UintSet storage set, uint256 index) internal view returns (uint256) {
        return uint256(_at(set._inner, index));
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(UintSet storage set) internal view returns (uint256[] memory) {
        bytes32[] memory store = _values(set._inner);
        uint256[] memory result;

        /// @solidity memory-safe-assembly
        assembly {
            result := store
        }

        return result;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity 0.8.26;

import {IERC4626, IERC20} from "@openzeppelin/contracts/interfaces/IERC4626.sol";
import {IERC1822Proxiable} from "@openzeppelin/contracts/interfaces/draft-IERC1822.sol";
import {IPositionManager} from "../IPositionManager.sol";
import {IMetaCore} from "../IMetaCore.sol";
import {IPriceFeed} from "../IPriceFeed.sol";
import {EmissionsLib} from "src/libraries/EmissionsLib.sol";

interface IBaseCollateralVault is IERC4626, IERC1822Proxiable {
    struct BaseInitParams {
        uint16 _minWithdrawFee;
        uint16 _maxWithdrawFee;
        uint16 _withdrawFee;
        IMetaCore _metaCore;
        // ERC4626
        IERC20 _asset;
        // ERC20
        string _sharesName;
        string _sharesSymbol;
    }

    struct BaseCollVaultStorage {
        uint16 minWithdrawFee;
        uint16 maxWithdrawFee;
        uint16 withdrawFee; // over rewarded tokens, in basis points
        uint8 assetDecimals;

        IMetaCore _metaCore;

        // Second mapping of this struct is usless, but it's for retrocompatibility with LSTCollateralVault
        EmissionsLib.BalanceData balanceData;
    }

    function totalAssets() external view returns (uint); // todo: maybe remove this 

    function fetchPrice() external view returns (uint);

    function getPrice(address token) external view returns (uint);

    function receiveDonations(address[] memory tokens, uint[] memory amounts, address receiver) external;

    function setWithdrawFee(uint16 _withdrawFee) external;

    function getBalance(address token) external view returns (uint);

    function getWithdrawFee() external view returns (uint16);

    function getMetaCore() external view returns (IMetaCore);

    function getPriceFeed() external view returns (IPriceFeed);

    function assetDecimals() external view returns (uint8);
}

// SPDX-License-Identifier: MIT

pragma solidity 0.8.26;

import {IERC20} from "@openzeppelin/contracts/interfaces/IERC20.sol";

interface ILSTWrapper is IERC20 {
    function metaCore() external view returns (address);
    function lstCollVault() external view returns (address);
    function decimals() external view returns (uint8);
    function depositFor(address account, uint256 amount) external returns (bool);
    function withdrawTo(address account, uint256 amount) external returns (bool);
    function recover(address account) external returns (uint256);
}

// SPDX-License-Identifier: MIT

pragma solidity 0.8.26;

interface ILSTVault {
    function stakingToken() external view returns (address);
    function stake(uint256 amount) external;
    function withdraw(uint256 amount) external;
    function getReward() external;
    function getRewardForUser(address account) external;
    function rewardTokens(uint) external view returns (address);
    function getAllRewardTokens() external view returns (address[] memory);
    function earned(address account, address _rewardsToken) external view returns (uint256);
    function registerVault(address stakingToken) external returns (address);
    function balanceOf(address account) external view returns (uint256);
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.26;

import {SafeCast} from "@openzeppelin/contracts/utils/math/SafeCast.sol";

library EmissionsLib {
    using SafeCast for uint256;
    uint64 constant internal DEFAULT_UNLOCK_RATE = 1e11; // 10% per second
    uint64 constant internal MAX_UNLOCK_RATE = 1e12; // 100%

    struct BalanceData {
        mapping(address token => uint) balance;
        mapping(address token => EmissionSchedule) emissionSchedule;
    }

    struct EmissionSchedule {
        uint128 emissions;
        uint64 lockTimestamp;
        uint64 _unlockRatePerSecond; // rate points
    }

    error AmountCannotBeZero();
    error EmissionRateExceedsMax();
    // error UnsupportedEmissionConfig();

    event EmissionsAdded(address indexed token, uint128 amount);
    event EmissionsSub(address indexed token, uint128 amount);
    event NewUnlockRatePerSecond(address indexed token, uint64 unlockRatePerSecond);

    /// @dev zero _unlockRatePerSecond parameter resets rate back to DEFAULT_UNLOCK_RATE
    function setUnlockRatePerSecond(BalanceData storage $, address token, uint64 _unlockRatePerSecond) internal {
        if (_unlockRatePerSecond > MAX_UNLOCK_RATE) revert EmissionRateExceedsMax();
        _addEmissions($, token, 0); // update lockTimestamp and emissions
        $.emissionSchedule[token]._unlockRatePerSecond = _unlockRatePerSecond;

        emit NewUnlockRatePerSecond(token, _unlockRatePerSecond);
    }

    function addEmissions(BalanceData storage $, address token, uint128 amount) internal {
        if (amount == 0) revert AmountCannotBeZero();
        _addEmissions($, token, amount);

        emit EmissionsAdded(token, amount);
    }

    function _addEmissions(BalanceData storage $, address token, uint128 amount) private {        
        EmissionSchedule memory schedule = $.emissionSchedule[token];

        uint256 _unlockTimestamp = unlockTimestamp(schedule);
        uint128 nextEmissions = (lockedEmissions(schedule, _unlockTimestamp) + amount).toUint128();

        schedule.emissions = nextEmissions;
        schedule.lockTimestamp = block.timestamp.toUint64();
        $.balance[token] += amount;

        $.emissionSchedule[token] = schedule;
    }

    function subEmissions(BalanceData storage $, address token, uint128 amount) internal {
        if (amount == 0) revert AmountCannotBeZero();
        _subEmissions($, token, amount);

        emit EmissionsSub(token, amount);
    }

    function _subEmissions(BalanceData storage $, address token, uint128 amount) private {
        EmissionSchedule memory schedule = $.emissionSchedule[token];

        uint256 _unlockTimestamp = unlockTimestamp(schedule);
        uint128 nextEmissions = (lockedEmissions(schedule, _unlockTimestamp) - amount).toUint128();

        schedule.emissions = nextEmissions;
        schedule.lockTimestamp = block.timestamp.toUint64();
        $.balance[token] -= amount;

        $.emissionSchedule[token] = schedule;
    }

    /// @dev Doesn't include locked emissions
    function unlockedEmissions(EmissionSchedule memory schedule) internal view returns (uint256) {
        return schedule.emissions - lockedEmissions(schedule, unlockTimestamp(schedule));
    }

    function balanceOfWithFutureEmissions(BalanceData storage $, address token) internal view returns (uint256) {
        return $.balance[token];
    }

    /**
     * @notice Returns the unlocked token emissions
     */
    function balanceOf(BalanceData storage $, address token) internal view returns (uint256) {
        EmissionSchedule memory schedule = $.emissionSchedule[token];
        return $.balance[token] - lockedEmissions(schedule, unlockTimestamp(schedule));
    }

    /**
     * @notice Returns locked emissions
     */
    function lockedEmissions(EmissionSchedule memory schedule, uint256 _unlockTimestamp) internal view returns (uint256) {
        if (block.timestamp >= _unlockTimestamp) {
            // all emissions were unlocked 
            return 0;
        } else {
            // emissions are still unlocking, calculate the amount of already unlocked emissions
            uint256 secondsSinceLockup = block.timestamp - schedule.lockTimestamp;
            // design decision - use dimensionless 'unlock rate units' to unlock emissions over a fixed time window 
            uint256 ratePointsUnlocked = unlockRatePerSecond(schedule) * secondsSinceLockup;
            // emissions remainder is designed to be added to balance in unlockTimestamp
            return schedule.emissions - ratePointsUnlocked * schedule.emissions / MAX_UNLOCK_RATE;
        }
    } 

    // timestamp at which all emissions are fully unlocked
    function unlockTimestamp(EmissionSchedule memory schedule) internal pure returns (uint256) {
        // ceil to account for remainder seconds left after integer division
        return divRoundUp(MAX_UNLOCK_RATE, unlockRatePerSecond(schedule)) + schedule.lockTimestamp; 
    }

    function unlockRatePerSecond(EmissionSchedule memory schedule) internal pure returns (uint256) {
        return schedule._unlockRatePerSecond == 0 ? DEFAULT_UNLOCK_RATE : schedule._unlockRatePerSecond;
    }

    function divRoundUp(uint256 dividend, uint256 divisor) internal pure returns (uint256) {
        return (dividend + divisor - 1) / divisor;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (interfaces/IERC4626.sol)

pragma solidity ^0.8.0;

import "../token/ERC20/IERC20.sol";
import "../token/ERC20/extensions/IERC20Metadata.sol";

/**
 * @dev Interface of the ERC4626 "Tokenized Vault Standard", as defined in
 * https://eips.ethereum.org/EIPS/eip-4626[ERC-4626].
 *
 * _Available since v4.7._
 */
interface IERC4626 is IERC20, IERC20Metadata {
    event Deposit(address indexed sender, address indexed owner, uint256 assets, uint256 shares);

    event Withdraw(
        address indexed sender,
        address indexed receiver,
        address indexed owner,
        uint256 assets,
        uint256 shares
    );

    /**
     * @dev Returns the address of the underlying token used for the Vault for accounting, depositing, and withdrawing.
     *
     * - MUST be an ERC-20 token contract.
     * - MUST NOT revert.
     */
    function asset() external view returns (address assetTokenAddress);

    /**
     * @dev Returns the total amount of the underlying asset that is “managed” by Vault.
     *
     * - SHOULD include any compounding that occurs from yield.
     * - MUST be inclusive of any fees that are charged against assets in the Vault.
     * - MUST NOT revert.
     */
    function totalAssets() external view returns (uint256 totalManagedAssets);

    /**
     * @dev Returns the amount of shares that the Vault would exchange for the amount of assets provided, in an ideal
     * scenario where all the conditions are met.
     *
     * - MUST NOT be inclusive of any fees that are charged against assets in the Vault.
     * - MUST NOT show any variations depending on the caller.
     * - MUST NOT reflect slippage or other on-chain conditions, when performing the actual exchange.
     * - MUST NOT revert.
     *
     * NOTE: This calculation MAY NOT reflect the “per-user” price-per-share, and instead should reflect the
     * “average-user’s” price-per-share, meaning what the average user should expect to see when exchanging to and
     * from.
     */
    function convertToShares(uint256 assets) external view returns (uint256 shares);

    /**
     * @dev Returns the amount of assets that the Vault would exchange for the amount of shares provided, in an ideal
     * scenario where all the conditions are met.
     *
     * - MUST NOT be inclusive of any fees that are charged against assets in the Vault.
     * - MUST NOT show any variations depending on the caller.
     * - MUST NOT reflect slippage or other on-chain conditions, when performing the actual exchange.
     * - MUST NOT revert.
     *
     * NOTE: This calculation MAY NOT reflect the “per-user” price-per-share, and instead should reflect the
     * “average-user’s” price-per-share, meaning what the average user should expect to see when exchanging to and
     * from.
     */
    function convertToAssets(uint256 shares) external view returns (uint256 assets);

    /**
     * @dev Returns the maximum amount of the underlying asset that can be deposited into the Vault for the receiver,
     * through a deposit call.
     *
     * - MUST return a limited value if receiver is subject to some deposit limit.
     * - MUST return 2 ** 256 - 1 if there is no limit on the maximum amount of assets that may be deposited.
     * - MUST NOT revert.
     */
    function maxDeposit(address receiver) external view returns (uint256 maxAssets);

    /**
     * @dev Allows an on-chain or off-chain user to simulate the effects of their deposit at the current block, given
     * current on-chain conditions.
     *
     * - MUST return as close to and no more than the exact amount of Vault shares that would be minted in a deposit
     *   call in the same transaction. I.e. deposit should return the same or more shares as previewDeposit if called
     *   in the same transaction.
     * - MUST NOT account for deposit limits like those returned from maxDeposit and should always act as though the
     *   deposit would be accepted, regardless if the user has enough tokens approved, etc.
     * - MUST be inclusive of deposit fees. Integrators should be aware of the existence of deposit fees.
     * - MUST NOT revert.
     *
     * NOTE: any unfavorable discrepancy between convertToShares and previewDeposit SHOULD be considered slippage in
     * share price or some other type of condition, meaning the depositor will lose assets by depositing.
     */
    function previewDeposit(uint256 assets) external view returns (uint256 shares);

    /**
     * @dev Mints shares Vault shares to receiver by depositing exactly amount of underlying tokens.
     *
     * - MUST emit the Deposit event.
     * - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the
     *   deposit execution, and are accounted for during deposit.
     * - MUST revert if all of assets cannot be deposited (due to deposit limit being reached, slippage, the user not
     *   approving enough underlying tokens to the Vault contract, etc).
     *
     * NOTE: most implementations will require pre-approval of the Vault with the Vault’s underlying asset token.
     */
    function deposit(uint256 assets, address receiver) external returns (uint256 shares);

    /**
     * @dev Returns the maximum amount of the Vault shares that can be minted for the receiver, through a mint call.
     * - MUST return a limited value if receiver is subject to some mint limit.
     * - MUST return 2 ** 256 - 1 if there is no limit on the maximum amount of shares that may be minted.
     * - MUST NOT revert.
     */
    function maxMint(address receiver) external view returns (uint256 maxShares);

    /**
     * @dev Allows an on-chain or off-chain user to simulate the effects of their mint at the current block, given
     * current on-chain conditions.
     *
     * - MUST return as close to and no fewer than the exact amount of assets that would be deposited in a mint call
     *   in the same transaction. I.e. mint should return the same or fewer assets as previewMint if called in the
     *   same transaction.
     * - MUST NOT account for mint limits like those returned from maxMint and should always act as though the mint
     *   would be accepted, regardless if the user has enough tokens approved, etc.
     * - MUST be inclusive of deposit fees. Integrators should be aware of the existence of deposit fees.
     * - MUST NOT revert.
     *
     * NOTE: any unfavorable discrepancy between convertToAssets and previewMint SHOULD be considered slippage in
     * share price or some other type of condition, meaning the depositor will lose assets by minting.
     */
    function previewMint(uint256 shares) external view returns (uint256 assets);

    /**
     * @dev Mints exactly shares Vault shares to receiver by depositing amount of underlying tokens.
     *
     * - MUST emit the Deposit event.
     * - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the mint
     *   execution, and are accounted for during mint.
     * - MUST revert if all of shares cannot be minted (due to deposit limit being reached, slippage, the user not
     *   approving enough underlying tokens to the Vault contract, etc).
     *
     * NOTE: most implementations will require pre-approval of the Vault with the Vault’s underlying asset token.
     */
    function mint(uint256 shares, address receiver) external returns (uint256 assets);

    /**
     * @dev Returns the maximum amount of the underlying asset that can be withdrawn from the owner balance in the
     * Vault, through a withdraw call.
     *
     * - MUST return a limited value if owner is subject to some withdrawal limit or timelock.
     * - MUST NOT revert.
     */
    function maxWithdraw(address owner) external view returns (uint256 maxAssets);

    /**
     * @dev Allows an on-chain or off-chain user to simulate the effects of their withdrawal at the current block,
     * given current on-chain conditions.
     *
     * - MUST return as close to and no fewer than the exact amount of Vault shares that would be burned in a withdraw
     *   call in the same transaction. I.e. withdraw should return the same or fewer shares as previewWithdraw if
     *   called
     *   in the same transaction.
     * - MUST NOT account for withdrawal limits like those returned from maxWithdraw and should always act as though
     *   the withdrawal would be accepted, regardless if the user has enough shares, etc.
     * - MUST be inclusive of withdrawal fees. Integrators should be aware of the existence of withdrawal fees.
     * - MUST NOT revert.
     *
     * NOTE: any unfavorable discrepancy between convertToShares and previewWithdraw SHOULD be considered slippage in
     * share price or some other type of condition, meaning the depositor will lose assets by depositing.
     */
    function previewWithdraw(uint256 assets) external view returns (uint256 shares);

    /**
     * @dev Burns shares from owner and sends exactly assets of underlying tokens to receiver.
     *
     * - MUST emit the Withdraw event.
     * - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the
     *   withdraw execution, and are accounted for during withdraw.
     * - MUST revert if all of assets cannot be withdrawn (due to withdrawal limit being reached, slippage, the owner
     *   not having enough shares, etc).
     *
     * Note that some implementations will require pre-requesting to the Vault before a withdrawal may be performed.
     * Those methods should be performed separately.
     */
    function withdraw(
        uint256 assets,
        address receiver,
        address owner
    ) external returns (uint256 shares);

    /**
     * @dev Returns the maximum amount of Vault shares that can be redeemed from the owner balance in the Vault,
     * through a redeem call.
     *
     * - MUST return a limited value if owner is subject to some withdrawal limit or timelock.
     * - MUST return balanceOf(owner) if owner is not subject to any withdrawal limit or timelock.
     * - MUST NOT revert.
     */
    function maxRedeem(address owner) external view returns (uint256 maxShares);

    /**
     * @dev Allows an on-chain or off-chain user to simulate the effects of their redeemption at the current block,
     * given current on-chain conditions.
     *
     * - MUST return as close to and no more than the exact amount of assets that would be withdrawn in a redeem call
     *   in the same transaction. I.e. redeem should return the same or more assets as previewRedeem if called in the
     *   same transaction.
     * - MUST NOT account for redemption limits like those returned from maxRedeem and should always act as though the
     *   redemption would be accepted, regardless if the user has enough shares, etc.
     * - MUST be inclusive of withdrawal fees. Integrators should be aware of the existence of withdrawal fees.
     * - MUST NOT revert.
     *
     * NOTE: any unfavorable discrepancy between convertToAssets and previewRedeem SHOULD be considered slippage in
     * share price or some other type of condition, meaning the depositor will lose assets by redeeming.
     */
    function previewRedeem(uint256 shares) external view returns (uint256 assets);

    /**
     * @dev Burns exactly shares from owner and sends assets of underlying tokens to receiver.
     *
     * - MUST emit the Withdraw event.
     * - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the
     *   redeem execution, and are accounted for during redeem.
     * - MUST revert if all of shares cannot be redeemed (due to withdrawal limit being reached, slippage, the owner
     *   not having enough shares, etc).
     *
     * NOTE: some implementations will require pre-requesting to the Vault before a withdrawal may be performed.
     * Those methods should be performed separately.
     */
    function redeem(
        uint256 shares,
        address receiver,
        address owner
    ) external returns (uint256 assets);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (interfaces/draft-IERC1822.sol)

pragma solidity ^0.8.0;

/**
 * @dev ERC1822: Universal Upgradeable Proxy Standard (UUPS) documents a method for upgradeability through a simplified
 * proxy whose upgrades are fully controlled by the current implementation.
 */
interface IERC1822Proxiable {
    /**
     * @dev Returns the storage slot that the proxiable contract assumes is being used to store the implementation
     * address.
     *
     * IMPORTANT: A proxy pointing at a proxiable contract should not be considered proxiable itself, because this risks
     * bricking a proxy that upgrades to it, by delegating to itself until out of gas. Thus it is critical that this
     * function revert if invoked through a proxy.
     */
    function proxiableUUID() external view returns (bytes32);
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

interface IPriceFeed {
    struct FeedType {
        address spotOracle;
        bool isCollVault;
    }

    event NewOracleRegistered(address token, address chainlinkAggregator, address underlyingDerivative);
    event PriceFeedStatusUpdated(address token, address oracle, bool isWorking);
    event PriceRecordUpdated(address indexed token, uint256 _price);
    event NewCollVaultRegistered(address collVault, bool enable);
    event NewSpotOracleRegistered(address token, address spotOracle);

    function fetchPrice(address _token) external view returns (uint256);

    function getMultiplePrices(address[] memory _tokens) external view returns (uint256[] memory prices);

    function setOracle(
        address _token,
        address _chainlinkOracle,
        uint32 _heartbeat,
        uint16 _staleThreshold,
        address underlyingDerivative
    ) external;

    function whitelistCollateralVault(address _collateralVaultShareToken, bool enable) external;
    
    function setSpotOracle(address _token, address _spotOracle) external;
    
    function MAX_PRICE_DEVIATION_FROM_PREVIOUS_ROUND() external view returns (uint256);

    function CORE() external view returns (address);

    function RESPONSE_TIMEOUT() external view returns (uint256);

    function TARGET_DIGITS() external view returns (uint256);

    function guardian() external view returns (address);

    function oracleRecords(
        address
    )
        external
        view
        returns (
        address chainLinkOracle,
        uint8 decimals,
        uint32 heartbeat,
        uint16 staleThreshold,
        address underlyingDerivative
    );

    function isCollVault(address _collateralVaultShareToken) external view returns (bool);

    function isStableBPT(address _oracle) external view returns (bool);

    function isWeightedBPT(address _oracle) external view returns (bool);

    function getSpotOracle(address _token) external view returns (address);

    function feedType(address _token) external view returns (FeedType memory);

    function owner() external view returns (address);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/math/SafeCast.sol)
// This file was procedurally generated from scripts/generate/templates/SafeCast.js.

pragma solidity ^0.8.0;

/**
 * @dev Wrappers over Solidity's uintXX/intXX casting operators with added overflow
 * checks.
 *
 * Downcasting from uint256/int256 in Solidity does not revert on overflow. This can
 * easily result in undesired exploitation or bugs, since developers usually
 * assume that overflows raise errors. `SafeCast` restores this intuition by
 * reverting the transaction when such an operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 *
 * Can be combined with {SafeMath} and {SignedSafeMath} to extend it to smaller types, by performing
 * all math on `uint256` and `int256` and then downcasting.
 */
library SafeCast {
    /**
     * @dev Returns the downcasted uint248 from uint256, reverting on
     * overflow (when the input is greater than largest uint248).
     *
     * Counterpart to Solidity's `uint248` operator.
     *
     * Requirements:
     *
     * - input must fit into 248 bits
     *
     * _Available since v4.7._
     */
    function toUint248(uint256 value) internal pure returns (uint248) {
        require(value <= type(uint248).max, "SafeCast: value doesn't fit in 248 bits");
        return uint248(value);
    }

    /**
     * @dev Returns the downcasted uint240 from uint256, reverting on
     * overflow (when the input is greater than largest uint240).
     *
     * Counterpart to Solidity's `uint240` operator.
     *
     * Requirements:
     *
     * - input must fit into 240 bits
     *
     * _Available since v4.7._
     */
    function toUint240(uint256 value) internal pure returns (uint240) {
        require(value <= type(uint240).max, "SafeCast: value doesn't fit in 240 bits");
        return uint240(value);
    }

    /**
     * @dev Returns the downcasted uint232 from uint256, reverting on
     * overflow (when the input is greater than largest uint232).
     *
     * Counterpart to Solidity's `uint232` operator.
     *
     * Requirements:
     *
     * - input must fit into 232 bits
     *
     * _Available since v4.7._
     */
    function toUint232(uint256 value) internal pure returns (uint232) {
        require(value <= type(uint232).max, "SafeCast: value doesn't fit in 232 bits");
        return uint232(value);
    }

    /**
     * @dev Returns the downcasted uint224 from uint256, reverting on
     * overflow (when the input is greater than largest uint224).
     *
     * Counterpart to Solidity's `uint224` operator.
     *
     * Requirements:
     *
     * - input must fit into 224 bits
     *
     * _Available since v4.2._
     */
    function toUint224(uint256 value) internal pure returns (uint224) {
        require(value <= type(uint224).max, "SafeCast: value doesn't fit in 224 bits");
        return uint224(value);
    }

    /**
     * @dev Returns the downcasted uint216 from uint256, reverting on
     * overflow (when the input is greater than largest uint216).
     *
     * Counterpart to Solidity's `uint216` operator.
     *
     * Requirements:
     *
     * - input must fit into 216 bits
     *
     * _Available since v4.7._
     */
    function toUint216(uint256 value) internal pure returns (uint216) {
        require(value <= type(uint216).max, "SafeCast: value doesn't fit in 216 bits");
        return uint216(value);
    }

    /**
     * @dev Returns the downcasted uint208 from uint256, reverting on
     * overflow (when the input is greater than largest uint208).
     *
     * Counterpart to Solidity's `uint208` operator.
     *
     * Requirements:
     *
     * - input must fit into 208 bits
     *
     * _Available since v4.7._
     */
    function toUint208(uint256 value) internal pure returns (uint208) {
        require(value <= type(uint208).max, "SafeCast: value doesn't fit in 208 bits");
        return uint208(value);
    }

    /**
     * @dev Returns the downcasted uint200 from uint256, reverting on
     * overflow (when the input is greater than largest uint200).
     *
     * Counterpart to Solidity's `uint200` operator.
     *
     * Requirements:
     *
     * - input must fit into 200 bits
     *
     * _Available since v4.7._
     */
    function toUint200(uint256 value) internal pure returns (uint200) {
        require(value <= type(uint200).max, "SafeCast: value doesn't fit in 200 bits");
        return uint200(value);
    }

    /**
     * @dev Returns the downcasted uint192 from uint256, reverting on
     * overflow (when the input is greater than largest uint192).
     *
     * Counterpart to Solidity's `uint192` operator.
     *
     * Requirements:
     *
     * - input must fit into 192 bits
     *
     * _Available since v4.7._
     */
    function toUint192(uint256 value) internal pure returns (uint192) {
        require(value <= type(uint192).max, "SafeCast: value doesn't fit in 192 bits");
        return uint192(value);
    }

    /**
     * @dev Returns the downcasted uint184 from uint256, reverting on
     * overflow (when the input is greater than largest uint184).
     *
     * Counterpart to Solidity's `uint184` operator.
     *
     * Requirements:
     *
     * - input must fit into 184 bits
     *
     * _Available since v4.7._
     */
    function toUint184(uint256 value) internal pure returns (uint184) {
        require(value <= type(uint184).max, "SafeCast: value doesn't fit in 184 bits");
        return uint184(value);
    }

    /**
     * @dev Returns the downcasted uint176 from uint256, reverting on
     * overflow (when the input is greater than largest uint176).
     *
     * Counterpart to Solidity's `uint176` operator.
     *
     * Requirements:
     *
     * - input must fit into 176 bits
     *
     * _Available since v4.7._
     */
    function toUint176(uint256 value) internal pure returns (uint176) {
        require(value <= type(uint176).max, "SafeCast: value doesn't fit in 176 bits");
        return uint176(value);
    }

    /**
     * @dev Returns the downcasted uint168 from uint256, reverting on
     * overflow (when the input is greater than largest uint168).
     *
     * Counterpart to Solidity's `uint168` operator.
     *
     * Requirements:
     *
     * - input must fit into 168 bits
     *
     * _Available since v4.7._
     */
    function toUint168(uint256 value) internal pure returns (uint168) {
        require(value <= type(uint168).max, "SafeCast: value doesn't fit in 168 bits");
        return uint168(value);
    }

    /**
     * @dev Returns the downcasted uint160 from uint256, reverting on
     * overflow (when the input is greater than largest uint160).
     *
     * Counterpart to Solidity's `uint160` operator.
     *
     * Requirements:
     *
     * - input must fit into 160 bits
     *
     * _Available since v4.7._
     */
    function toUint160(uint256 value) internal pure returns (uint160) {
        require(value <= type(uint160).max, "SafeCast: value doesn't fit in 160 bits");
        return uint160(value);
    }

    /**
     * @dev Returns the downcasted uint152 from uint256, reverting on
     * overflow (when the input is greater than largest uint152).
     *
     * Counterpart to Solidity's `uint152` operator.
     *
     * Requirements:
     *
     * - input must fit into 152 bits
     *
     * _Available since v4.7._
     */
    function toUint152(uint256 value) internal pure returns (uint152) {
        require(value <= type(uint152).max, "SafeCast: value doesn't fit in 152 bits");
        return uint152(value);
    }

    /**
     * @dev Returns the downcasted uint144 from uint256, reverting on
     * overflow (when the input is greater than largest uint144).
     *
     * Counterpart to Solidity's `uint144` operator.
     *
     * Requirements:
     *
     * - input must fit into 144 bits
     *
     * _Available since v4.7._
     */
    function toUint144(uint256 value) internal pure returns (uint144) {
        require(value <= type(uint144).max, "SafeCast: value doesn't fit in 144 bits");
        return uint144(value);
    }

    /**
     * @dev Returns the downcasted uint136 from uint256, reverting on
     * overflow (when the input is greater than largest uint136).
     *
     * Counterpart to Solidity's `uint136` operator.
     *
     * Requirements:
     *
     * - input must fit into 136 bits
     *
     * _Available since v4.7._
     */
    function toUint136(uint256 value) internal pure returns (uint136) {
        require(value <= type(uint136).max, "SafeCast: value doesn't fit in 136 bits");
        return uint136(value);
    }

    /**
     * @dev Returns the downcasted uint128 from uint256, reverting on
     * overflow (when the input is greater than largest uint128).
     *
     * Counterpart to Solidity's `uint128` operator.
     *
     * Requirements:
     *
     * - input must fit into 128 bits
     *
     * _Available since v2.5._
     */
    function toUint128(uint256 value) internal pure returns (uint128) {
        require(value <= type(uint128).max, "SafeCast: value doesn't fit in 128 bits");
        return uint128(value);
    }

    /**
     * @dev Returns the downcasted uint120 from uint256, reverting on
     * overflow (when the input is greater than largest uint120).
     *
     * Counterpart to Solidity's `uint120` operator.
     *
     * Requirements:
     *
     * - input must fit into 120 bits
     *
     * _Available since v4.7._
     */
    function toUint120(uint256 value) internal pure returns (uint120) {
        require(value <= type(uint120).max, "SafeCast: value doesn't fit in 120 bits");
        return uint120(value);
    }

    /**
     * @dev Returns the downcasted uint112 from uint256, reverting on
     * overflow (when the input is greater than largest uint112).
     *
     * Counterpart to Solidity's `uint112` operator.
     *
     * Requirements:
     *
     * - input must fit into 112 bits
     *
     * _Available since v4.7._
     */
    function toUint112(uint256 value) internal pure returns (uint112) {
        require(value <= type(uint112).max, "SafeCast: value doesn't fit in 112 bits");
        return uint112(value);
    }

    /**
     * @dev Returns the downcasted uint104 from uint256, reverting on
     * overflow (when the input is greater than largest uint104).
     *
     * Counterpart to Solidity's `uint104` operator.
     *
     * Requirements:
     *
     * - input must fit into 104 bits
     *
     * _Available since v4.7._
     */
    function toUint104(uint256 value) internal pure returns (uint104) {
        require(value <= type(uint104).max, "SafeCast: value doesn't fit in 104 bits");
        return uint104(value);
    }

    /**
     * @dev Returns the downcasted uint96 from uint256, reverting on
     * overflow (when the input is greater than largest uint96).
     *
     * Counterpart to Solidity's `uint96` operator.
     *
     * Requirements:
     *
     * - input must fit into 96 bits
     *
     * _Available since v4.2._
     */
    function toUint96(uint256 value) internal pure returns (uint96) {
        require(value <= type(uint96).max, "SafeCast: value doesn't fit in 96 bits");
        return uint96(value);
    }

    /**
     * @dev Returns the downcasted uint88 from uint256, reverting on
     * overflow (when the input is greater than largest uint88).
     *
     * Counterpart to Solidity's `uint88` operator.
     *
     * Requirements:
     *
     * - input must fit into 88 bits
     *
     * _Available since v4.7._
     */
    function toUint88(uint256 value) internal pure returns (uint88) {
        require(value <= type(uint88).max, "SafeCast: value doesn't fit in 88 bits");
        return uint88(value);
    }

    /**
     * @dev Returns the downcasted uint80 from uint256, reverting on
     * overflow (when the input is greater than largest uint80).
     *
     * Counterpart to Solidity's `uint80` operator.
     *
     * Requirements:
     *
     * - input must fit into 80 bits
     *
     * _Available since v4.7._
     */
    function toUint80(uint256 value) internal pure returns (uint80) {
        require(value <= type(uint80).max, "SafeCast: value doesn't fit in 80 bits");
        return uint80(value);
    }

    /**
     * @dev Returns the downcasted uint72 from uint256, reverting on
     * overflow (when the input is greater than largest uint72).
     *
     * Counterpart to Solidity's `uint72` operator.
     *
     * Requirements:
     *
     * - input must fit into 72 bits
     *
     * _Available since v4.7._
     */
    function toUint72(uint256 value) internal pure returns (uint72) {
        require(value <= type(uint72).max, "SafeCast: value doesn't fit in 72 bits");
        return uint72(value);
    }

    /**
     * @dev Returns the downcasted uint64 from uint256, reverting on
     * overflow (when the input is greater than largest uint64).
     *
     * Counterpart to Solidity's `uint64` operator.
     *
     * Requirements:
     *
     * - input must fit into 64 bits
     *
     * _Available since v2.5._
     */
    function toUint64(uint256 value) internal pure returns (uint64) {
        require(value <= type(uint64).max, "SafeCast: value doesn't fit in 64 bits");
        return uint64(value);
    }

    /**
     * @dev Returns the downcasted uint56 from uint256, reverting on
     * overflow (when the input is greater than largest uint56).
     *
     * Counterpart to Solidity's `uint56` operator.
     *
     * Requirements:
     *
     * - input must fit into 56 bits
     *
     * _Available since v4.7._
     */
    function toUint56(uint256 value) internal pure returns (uint56) {
        require(value <= type(uint56).max, "SafeCast: value doesn't fit in 56 bits");
        return uint56(value);
    }

    /**
     * @dev Returns the downcasted uint48 from uint256, reverting on
     * overflow (when the input is greater than largest uint48).
     *
     * Counterpart to Solidity's `uint48` operator.
     *
     * Requirements:
     *
     * - input must fit into 48 bits
     *
     * _Available since v4.7._
     */
    function toUint48(uint256 value) internal pure returns (uint48) {
        require(value <= type(uint48).max, "SafeCast: value doesn't fit in 48 bits");
        return uint48(value);
    }

    /**
     * @dev Returns the downcasted uint40 from uint256, reverting on
     * overflow (when the input is greater than largest uint40).
     *
     * Counterpart to Solidity's `uint40` operator.
     *
     * Requirements:
     *
     * - input must fit into 40 bits
     *
     * _Available since v4.7._
     */
    function toUint40(uint256 value) internal pure returns (uint40) {
        require(value <= type(uint40).max, "SafeCast: value doesn't fit in 40 bits");
        return uint40(value);
    }

    /**
     * @dev Returns the downcasted uint32 from uint256, reverting on
     * overflow (when the input is greater than largest uint32).
     *
     * Counterpart to Solidity's `uint32` operator.
     *
     * Requirements:
     *
     * - input must fit into 32 bits
     *
     * _Available since v2.5._
     */
    function toUint32(uint256 value) internal pure returns (uint32) {
        require(value <= type(uint32).max, "SafeCast: value doesn't fit in 32 bits");
        return uint32(value);
    }

    /**
     * @dev Returns the downcasted uint24 from uint256, reverting on
     * overflow (when the input is greater than largest uint24).
     *
     * Counterpart to Solidity's `uint24` operator.
     *
     * Requirements:
     *
     * - input must fit into 24 bits
     *
     * _Available since v4.7._
     */
    function toUint24(uint256 value) internal pure returns (uint24) {
        require(value <= type(uint24).max, "SafeCast: value doesn't fit in 24 bits");
        return uint24(value);
    }

    /**
     * @dev Returns the downcasted uint16 from uint256, reverting on
     * overflow (when the input is greater than largest uint16).
     *
     * Counterpart to Solidity's `uint16` operator.
     *
     * Requirements:
     *
     * - input must fit into 16 bits
     *
     * _Available since v2.5._
     */
    function toUint16(uint256 value) internal pure returns (uint16) {
        require(value <= type(uint16).max, "SafeCast: value doesn't fit in 16 bits");
        return uint16(value);
    }

    /**
     * @dev Returns the downcasted uint8 from uint256, reverting on
     * overflow (when the input is greater than largest uint8).
     *
     * Counterpart to Solidity's `uint8` operator.
     *
     * Requirements:
     *
     * - input must fit into 8 bits
     *
     * _Available since v2.5._
     */
    function toUint8(uint256 value) internal pure returns (uint8) {
        require(value <= type(uint8).max, "SafeCast: value doesn't fit in 8 bits");
        return uint8(value);
    }

    /**
     * @dev Converts a signed int256 into an unsigned uint256.
     *
     * Requirements:
     *
     * - input must be greater than or equal to 0.
     *
     * _Available since v3.0._
     */
    function toUint256(int256 value) internal pure returns (uint256) {
        require(value >= 0, "SafeCast: value must be positive");
        return uint256(value);
    }

    /**
     * @dev Returns the downcasted int248 from int256, reverting on
     * overflow (when the input is less than smallest int248 or
     * greater than largest int248).
     *
     * Counterpart to Solidity's `int248` operator.
     *
     * Requirements:
     *
     * - input must fit into 248 bits
     *
     * _Available since v4.7._
     */
    function toInt248(int256 value) internal pure returns (int248 downcasted) {
        downcasted = int248(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 248 bits");
    }

    /**
     * @dev Returns the downcasted int240 from int256, reverting on
     * overflow (when the input is less than smallest int240 or
     * greater than largest int240).
     *
     * Counterpart to Solidity's `int240` operator.
     *
     * Requirements:
     *
     * - input must fit into 240 bits
     *
     * _Available since v4.7._
     */
    function toInt240(int256 value) internal pure returns (int240 downcasted) {
        downcasted = int240(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 240 bits");
    }

    /**
     * @dev Returns the downcasted int232 from int256, reverting on
     * overflow (when the input is less than smallest int232 or
     * greater than largest int232).
     *
     * Counterpart to Solidity's `int232` operator.
     *
     * Requirements:
     *
     * - input must fit into 232 bits
     *
     * _Available since v4.7._
     */
    function toInt232(int256 value) internal pure returns (int232 downcasted) {
        downcasted = int232(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 232 bits");
    }

    /**
     * @dev Returns the downcasted int224 from int256, reverting on
     * overflow (when the input is less than smallest int224 or
     * greater than largest int224).
     *
     * Counterpart to Solidity's `int224` operator.
     *
     * Requirements:
     *
     * - input must fit into 224 bits
     *
     * _Available since v4.7._
     */
    function toInt224(int256 value) internal pure returns (int224 downcasted) {
        downcasted = int224(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 224 bits");
    }

    /**
     * @dev Returns the downcasted int216 from int256, reverting on
     * overflow (when the input is less than smallest int216 or
     * greater than largest int216).
     *
     * Counterpart to Solidity's `int216` operator.
     *
     * Requirements:
     *
     * - input must fit into 216 bits
     *
     * _Available since v4.7._
     */
    function toInt216(int256 value) internal pure returns (int216 downcasted) {
        downcasted = int216(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 216 bits");
    }

    /**
     * @dev Returns the downcasted int208 from int256, reverting on
     * overflow (when the input is less than smallest int208 or
     * greater than largest int208).
     *
     * Counterpart to Solidity's `int208` operator.
     *
     * Requirements:
     *
     * - input must fit into 208 bits
     *
     * _Available since v4.7._
     */
    function toInt208(int256 value) internal pure returns (int208 downcasted) {
        downcasted = int208(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 208 bits");
    }

    /**
     * @dev Returns the downcasted int200 from int256, reverting on
     * overflow (when the input is less than smallest int200 or
     * greater than largest int200).
     *
     * Counterpart to Solidity's `int200` operator.
     *
     * Requirements:
     *
     * - input must fit into 200 bits
     *
     * _Available since v4.7._
     */
    function toInt200(int256 value) internal pure returns (int200 downcasted) {
        downcasted = int200(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 200 bits");
    }

    /**
     * @dev Returns the downcasted int192 from int256, reverting on
     * overflow (when the input is less than smallest int192 or
     * greater than largest int192).
     *
     * Counterpart to Solidity's `int192` operator.
     *
     * Requirements:
     *
     * - input must fit into 192 bits
     *
     * _Available since v4.7._
     */
    function toInt192(int256 value) internal pure returns (int192 downcasted) {
        downcasted = int192(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 192 bits");
    }

    /**
     * @dev Returns the downcasted int184 from int256, reverting on
     * overflow (when the input is less than smallest int184 or
     * greater than largest int184).
     *
     * Counterpart to Solidity's `int184` operator.
     *
     * Requirements:
     *
     * - input must fit into 184 bits
     *
     * _Available since v4.7._
     */
    function toInt184(int256 value) internal pure returns (int184 downcasted) {
        downcasted = int184(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 184 bits");
    }

    /**
     * @dev Returns the downcasted int176 from int256, reverting on
     * overflow (when the input is less than smallest int176 or
     * greater than largest int176).
     *
     * Counterpart to Solidity's `int176` operator.
     *
     * Requirements:
     *
     * - input must fit into 176 bits
     *
     * _Available since v4.7._
     */
    function toInt176(int256 value) internal pure returns (int176 downcasted) {
        downcasted = int176(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 176 bits");
    }

    /**
     * @dev Returns the downcasted int168 from int256, reverting on
     * overflow (when the input is less than smallest int168 or
     * greater than largest int168).
     *
     * Counterpart to Solidity's `int168` operator.
     *
     * Requirements:
     *
     * - input must fit into 168 bits
     *
     * _Available since v4.7._
     */
    function toInt168(int256 value) internal pure returns (int168 downcasted) {
        downcasted = int168(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 168 bits");
    }

    /**
     * @dev Returns the downcasted int160 from int256, reverting on
     * overflow (when the input is less than smallest int160 or
     * greater than largest int160).
     *
     * Counterpart to Solidity's `int160` operator.
     *
     * Requirements:
     *
     * - input must fit into 160 bits
     *
     * _Available since v4.7._
     */
    function toInt160(int256 value) internal pure returns (int160 downcasted) {
        downcasted = int160(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 160 bits");
    }

    /**
     * @dev Returns the downcasted int152 from int256, reverting on
     * overflow (when the input is less than smallest int152 or
     * greater than largest int152).
     *
     * Counterpart to Solidity's `int152` operator.
     *
     * Requirements:
     *
     * - input must fit into 152 bits
     *
     * _Available since v4.7._
     */
    function toInt152(int256 value) internal pure returns (int152 downcasted) {
        downcasted = int152(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 152 bits");
    }

    /**
     * @dev Returns the downcasted int144 from int256, reverting on
     * overflow (when the input is less than smallest int144 or
     * greater than largest int144).
     *
     * Counterpart to Solidity's `int144` operator.
     *
     * Requirements:
     *
     * - input must fit into 144 bits
     *
     * _Available since v4.7._
     */
    function toInt144(int256 value) internal pure returns (int144 downcasted) {
        downcasted = int144(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 144 bits");
    }

    /**
     * @dev Returns the downcasted int136 from int256, reverting on
     * overflow (when the input is less than smallest int136 or
     * greater than largest int136).
     *
     * Counterpart to Solidity's `int136` operator.
     *
     * Requirements:
     *
     * - input must fit into 136 bits
     *
     * _Available since v4.7._
     */
    function toInt136(int256 value) internal pure returns (int136 downcasted) {
        downcasted = int136(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 136 bits");
    }

    /**
     * @dev Returns the downcasted int128 from int256, reverting on
     * overflow (when the input is less than smallest int128 or
     * greater than largest int128).
     *
     * Counterpart to Solidity's `int128` operator.
     *
     * Requirements:
     *
     * - input must fit into 128 bits
     *
     * _Available since v3.1._
     */
    function toInt128(int256 value) internal pure returns (int128 downcasted) {
        downcasted = int128(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 128 bits");
    }

    /**
     * @dev Returns the downcasted int120 from int256, reverting on
     * overflow (when the input is less than smallest int120 or
     * greater than largest int120).
     *
     * Counterpart to Solidity's `int120` operator.
     *
     * Requirements:
     *
     * - input must fit into 120 bits
     *
     * _Available since v4.7._
     */
    function toInt120(int256 value) internal pure returns (int120 downcasted) {
        downcasted = int120(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 120 bits");
    }

    /**
     * @dev Returns the downcasted int112 from int256, reverting on
     * overflow (when the input is less than smallest int112 or
     * greater than largest int112).
     *
     * Counterpart to Solidity's `int112` operator.
     *
     * Requirements:
     *
     * - input must fit into 112 bits
     *
     * _Available since v4.7._
     */
    function toInt112(int256 value) internal pure returns (int112 downcasted) {
        downcasted = int112(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 112 bits");
    }

    /**
     * @dev Returns the downcasted int104 from int256, reverting on
     * overflow (when the input is less than smallest int104 or
     * greater than largest int104).
     *
     * Counterpart to Solidity's `int104` operator.
     *
     * Requirements:
     *
     * - input must fit into 104 bits
     *
     * _Available since v4.7._
     */
    function toInt104(int256 value) internal pure returns (int104 downcasted) {
        downcasted = int104(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 104 bits");
    }

    /**
     * @dev Returns the downcasted int96 from int256, reverting on
     * overflow (when the input is less than smallest int96 or
     * greater than largest int96).
     *
     * Counterpart to Solidity's `int96` operator.
     *
     * Requirements:
     *
     * - input must fit into 96 bits
     *
     * _Available since v4.7._
     */
    function toInt96(int256 value) internal pure returns (int96 downcasted) {
        downcasted = int96(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 96 bits");
    }

    /**
     * @dev Returns the downcasted int88 from int256, reverting on
     * overflow (when the input is less than smallest int88 or
     * greater than largest int88).
     *
     * Counterpart to Solidity's `int88` operator.
     *
     * Requirements:
     *
     * - input must fit into 88 bits
     *
     * _Available since v4.7._
     */
    function toInt88(int256 value) internal pure returns (int88 downcasted) {
        downcasted = int88(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 88 bits");
    }

    /**
     * @dev Returns the downcasted int80 from int256, reverting on
     * overflow (when the input is less than smallest int80 or
     * greater than largest int80).
     *
     * Counterpart to Solidity's `int80` operator.
     *
     * Requirements:
     *
     * - input must fit into 80 bits
     *
     * _Available since v4.7._
     */
    function toInt80(int256 value) internal pure returns (int80 downcasted) {
        downcasted = int80(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 80 bits");
    }

    /**
     * @dev Returns the downcasted int72 from int256, reverting on
     * overflow (when the input is less than smallest int72 or
     * greater than largest int72).
     *
     * Counterpart to Solidity's `int72` operator.
     *
     * Requirements:
     *
     * - input must fit into 72 bits
     *
     * _Available since v4.7._
     */
    function toInt72(int256 value) internal pure returns (int72 downcasted) {
        downcasted = int72(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 72 bits");
    }

    /**
     * @dev Returns the downcasted int64 from int256, reverting on
     * overflow (when the input is less than smallest int64 or
     * greater than largest int64).
     *
     * Counterpart to Solidity's `int64` operator.
     *
     * Requirements:
     *
     * - input must fit into 64 bits
     *
     * _Available since v3.1._
     */
    function toInt64(int256 value) internal pure returns (int64 downcasted) {
        downcasted = int64(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 64 bits");
    }

    /**
     * @dev Returns the downcasted int56 from int256, reverting on
     * overflow (when the input is less than smallest int56 or
     * greater than largest int56).
     *
     * Counterpart to Solidity's `int56` operator.
     *
     * Requirements:
     *
     * - input must fit into 56 bits
     *
     * _Available since v4.7._
     */
    function toInt56(int256 value) internal pure returns (int56 downcasted) {
        downcasted = int56(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 56 bits");
    }

    /**
     * @dev Returns the downcasted int48 from int256, reverting on
     * overflow (when the input is less than smallest int48 or
     * greater than largest int48).
     *
     * Counterpart to Solidity's `int48` operator.
     *
     * Requirements:
     *
     * - input must fit into 48 bits
     *
     * _Available since v4.7._
     */
    function toInt48(int256 value) internal pure returns (int48 downcasted) {
        downcasted = int48(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 48 bits");
    }

    /**
     * @dev Returns the downcasted int40 from int256, reverting on
     * overflow (when the input is less than smallest int40 or
     * greater than largest int40).
     *
     * Counterpart to Solidity's `int40` operator.
     *
     * Requirements:
     *
     * - input must fit into 40 bits
     *
     * _Available since v4.7._
     */
    function toInt40(int256 value) internal pure returns (int40 downcasted) {
        downcasted = int40(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 40 bits");
    }

    /**
     * @dev Returns the downcasted int32 from int256, reverting on
     * overflow (when the input is less than smallest int32 or
     * greater than largest int32).
     *
     * Counterpart to Solidity's `int32` operator.
     *
     * Requirements:
     *
     * - input must fit into 32 bits
     *
     * _Available since v3.1._
     */
    function toInt32(int256 value) internal pure returns (int32 downcasted) {
        downcasted = int32(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 32 bits");
    }

    /**
     * @dev Returns the downcasted int24 from int256, reverting on
     * overflow (when the input is less than smallest int24 or
     * greater than largest int24).
     *
     * Counterpart to Solidity's `int24` operator.
     *
     * Requirements:
     *
     * - input must fit into 24 bits
     *
     * _Available since v4.7._
     */
    function toInt24(int256 value) internal pure returns (int24 downcasted) {
        downcasted = int24(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 24 bits");
    }

    /**
     * @dev Returns the downcasted int16 from int256, reverting on
     * overflow (when the input is less than smallest int16 or
     * greater than largest int16).
     *
     * Counterpart to Solidity's `int16` operator.
     *
     * Requirements:
     *
     * - input must fit into 16 bits
     *
     * _Available since v3.1._
     */
    function toInt16(int256 value) internal pure returns (int16 downcasted) {
        downcasted = int16(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 16 bits");
    }

    /**
     * @dev Returns the downcasted int8 from int256, reverting on
     * overflow (when the input is less than smallest int8 or
     * greater than largest int8).
     *
     * Counterpart to Solidity's `int8` operator.
     *
     * Requirements:
     *
     * - input must fit into 8 bits
     *
     * _Available since v3.1._
     */
    function toInt8(int256 value) internal pure returns (int8 downcasted) {
        downcasted = int8(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 8 bits");
    }

    /**
     * @dev Converts an unsigned uint256 into a signed int256.
     *
     * Requirements:
     *
     * - input must be less than or equal to maxInt256.
     *
     * _Available since v3.0._
     */
    function toInt256(uint256 value) internal pure returns (int256) {
        // Note: Unsafe cast below is okay because `type(int256).max` is guaranteed to be positive
        require(value <= uint256(type(int256).max), "SafeCast: value doesn't fit in an int256");
        return int256(value);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/IERC20Metadata.sol)

pragma solidity ^0.8.0;

import "../IERC20.sol";

/**
 * @dev Interface for the optional metadata functions from the ERC20 standard.
 *
 * _Available since v4.1._
 */
interface IERC20Metadata is IERC20 {
    /**
     * @dev Returns the name of the token.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the symbol of the token.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the decimals places of the token.
     */
    function decimals() external view returns (uint8);
}

{
  "remappings": [
    "@openzeppelin/contracts/=lib/openzeppelin-contracts/contracts/",
    "@openzeppelin-upgradeable/contracts/=lib/openzeppelin-contracts-upgradeable/contracts/",
    "solady/=lib/solady/src/",
    "@solmate/=lib/solmate/src/",
    "@chimera/=lib/chimera/src/",
    "forge-std/=lib/forge-std/src/",
    "@uniswap/v3-core/=lib/v3-core/",
    "@uniswap/v3-periphery/=lib/v3-periphery/",
    "@openzeppelin/contracts-upgradeable/=lib/openzeppelin-contracts-upgradeable/contracts/",
    "chimera/=lib/chimera/src/",
    "ds-test/=lib/solmate/lib/ds-test/src/",
    "erc4626-tests/=lib/openzeppelin-contracts-upgradeable/lib/erc4626-tests/",
    "halmos-cheatcodes/=lib/openzeppelin-contracts-upgradeable/lib/halmos-cheatcodes/src/",
    "openzeppelin-contracts-upgradeable/=lib/openzeppelin-contracts-upgradeable/",
    "openzeppelin-contracts/=lib/openzeppelin-contracts/",
    "rewards/=lib/rewards/",
    "solmate/=lib/solmate/src/",
    "v3-core/=lib/v3-core/contracts/",
    "v3-periphery/=lib/v3-periphery/contracts/"
  ],
  "optimizer": {
    "enabled": false,
    "runs": 200
  },
  "metadata": {
    "useLiteralContent": false,
    "bytecodeHash": "ipfs",
    "appendCBOR": true
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  },
  "evmVersion": "cancun",
  "viaIR": false
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[{"internalType":"address","name":"_borrowerOperations","type":"address"},{"internalType":"address","name":"_metaCore","type":"address"}],"stateMutability":"nonpayable","type":"constructor"},{"inputs":[{"internalType":"contract IPositionManager","name":"positionManager","type":"address"},{"internalType":"contract ILSTCollateralVault","name":"collVault","type":"address"},{"internalType":"address","name":"receiver","type":"address"},{"internalType":"uint256","name":"_collIndex","type":"uint256"},{"internalType":"uint256","name":"minAssetsWithdrawn","type":"uint256"}],"name":"claimCollateralRouter","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"contract IERC20[]","name":"tokens","type":"address[]"},{"internalType":"uint256[]","name":"amounts","type":"uint256[]"}],"name":"claimLockedTokens","outputs":[],"stateMutability":"nonpayable","type":"function"},{"stateMutability":"payable","type":"receive"}]

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

00000000000000000000000049fd0c4fb5172b20b7636b13c49fb15da52d5bd40000000000000000000000008700af942be2a6e5566306d0ee7bcc5a3a6e0ce8

-----Decoded View---------------
Arg [0] : _borrowerOperations (address): 0x49FD0C4fb5172b20b7636b13c49fb15dA52D5bd4
Arg [1] : _metaCore (address): 0x8700AF942BE2A6E5566306D0eE7Bcc5a3A6E0ce8

-----Encoded View---------------
2 Constructor Arguments found :
Arg [0] : 00000000000000000000000049fd0c4fb5172b20b7636b13c49fb15da52d5bd4
Arg [1] : 0000000000000000000000008700af942be2a6e5566306d0ee7bcc5a3a6e0ce8