Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta

More Options

• Similar
• Submit Audit
• Compare

// SPDX-License-Identifier: SEL-1.0
// Copyright © 2025 Veda Tech Labs
// Derived from Boring Vault Software © 2025 Veda Tech Labs (TEST ONLY – NO COMMERCIAL USE)
// Licensed under Software Evaluation License, Version 1.0
pragma solidity 0.8.21;

import {ERC20} from "@solmate/tokens/ERC20.sol";
import {WETH} from "@solmate/tokens/WETH.sol";
import {BoringVault} from "src/base/BoringVault.sol";
import {AccountantWithRateProviders} from "src/base/Roles/AccountantWithRateProviders.sol";
import {FixedPointMathLib} from "@solmate/utils/FixedPointMathLib.sol";
import {SafeTransferLib} from "@solmate/utils/SafeTransferLib.sol";
import {BeforeTransferHook} from "src/interfaces/BeforeTransferHook.sol";
import {Auth, Authority} from "@solmate/auth/Auth.sol";
import {ReentrancyGuard} from "@solmate/utils/ReentrancyGuard.sol";
import {IPausable} from "src/interfaces/IPausable.sol";
import {EnumerableSet} from "@openzeppelin/contracts/utils/structs/EnumerableSet.sol";
import {IBoringSolver} from "src/base/Roles/BoringQueue/IBoringSolver.sol";

contract BoringOnChainQueue is Auth, ReentrancyGuard, IPausable {
    using EnumerableSet for EnumerableSet.Bytes32Set;
    using SafeTransferLib for BoringVault;
    using SafeTransferLib for ERC20;
    using FixedPointMathLib for uint256;

    // ========================================= STRUCTS =========================================

    /**
     * @param allowWithdraws Whether or not withdraws are allowed for this asset.
     * @param secondsToMaturity The time in seconds it takes for the asset to mature.
     * @param minimumSecondsToDeadline The minimum time in seconds a withdraw request must be valid for before it is expired
     * @param minDiscount The minimum discount allowed for a withdraw request.
     * @param maxDiscount The maximum discount allowed for a withdraw request.
     * @param minimumShares The minimum amount of shares that can be withdrawn.
     * @param withdrawCapacity The maximum amount of total shares that can be withdrawn.
     *        - Can be set to type(uint256).max to allow unlimited withdraws.
     *        - Decremented when users make requests.
     *        - Incremented when users cancel requests.
     *        - Can be set by admin.
     */
    struct WithdrawAsset {
        bool allowWithdraws;
        uint24 secondsToMaturity;
        uint24 minimumSecondsToDeadline;
        uint16 minDiscount;
        uint16 maxDiscount;
        uint96 minimumShares;
        uint256 withdrawCapacity;
    }

    /**
     * @param nonce The nonce of the request, used to make it impossible for request Ids to be repeated.
     * @param user The user that made the request.
     * @param assetOut The asset that the user wants to withdraw.
     * @param amountOfShares The amount of shares the user wants to withdraw.
     * @param amountOfAssets The amount of assets the user will receive.
     * @param creationTime The time the request was made.
     * @param secondsToMaturity The time in seconds it takes for the asset to mature.
     * @param secondsToDeadline The time in seconds the request is valid for.
     */
    struct OnChainWithdraw {
        uint96 nonce; // read from state, used to make it impossible for request Ids to be repeated.
        address user; // msg.sender
        address assetOut; // input sanitized
        uint128 amountOfShares; // input transfered in
        uint128 amountOfAssets; // derived from amountOfShares and price
        uint40 creationTime; // time withdraw was made
        uint24 secondsToMaturity; // in contract, from withdrawAsset?
        uint24 secondsToDeadline; // in contract, from withdrawAsset? To get the deadline you take the creationTime add seconds to maturity, add the secondsToDeadline
    }

    // ========================================= CONSTANTS =========================================
    /**
     * @notice The maximum discount allowed for a withdraw asset.
     */
    uint16 internal constant MAX_DISCOUNT = 0.3e4;

    /**
     * @notice The maximum time in seconds a withdraw asset can take to mature.
     */
    uint24 internal constant MAXIMUM_SECONDS_TO_MATURITY = 30 days;

    /**
     * @notice Caps the minimum time in seconds a withdraw request must be valid for before it is expired.
     */
    uint24 internal constant MAXIMUM_MINIMUM_SECONDS_TO_DEADLINE = 30 days;

    // ========================================= MODIFIERS =========================================

    /**
     * @notice Ensure that the request user is the same as the message sender.
     */
    modifier onlyRequestUser(address requestUser, address msgSender) {
        if (requestUser != msgSender) revert BoringOnChainQueue__BadUser();
        _;
    }

    // ========================================= GLOBAL STATE =========================================

    /**
     * @notice Open Zeppelin EnumerableSet to store all withdraw requests, by there request Id.
     */
    EnumerableSet.Bytes32Set private _withdrawRequests;

    /**
     * @notice Mapping of asset addresses to WithdrawAssets.
     */
    mapping(address => WithdrawAsset) public withdrawAssets;

    /**
     * @notice The nonce of the next request.
     * @dev The purpose of this nonce is to prevent request Ids from being repeated.
     * @dev Start at 1, since 0 is considered invalid.
     * @dev When incrementing the nonce, an unchecked block is used to save gas.
     *      This is safe because you can not feasibly make a request, and then cause an overflow
     *      in the same block such that you can make 2 requests with the same request Id.
     *      And even if you did, the tx would revert with a keccak256 collision error.
     */
    uint96 public nonce = 1;

    /**
     * @notice Whether or not the contract is paused.
     */
    bool public isPaused;

    //============================== ERRORS ===============================

    error BoringOnChainQueue__Paused();
    error BoringOnChainQueue__WithdrawsNotAllowedForAsset();
    error BoringOnChainQueue__BadDiscount();
    error BoringOnChainQueue__BadShareAmount();
    error BoringOnChainQueue__BadDeadline();
    error BoringOnChainQueue__BadUser();
    error BoringOnChainQueue__DeadlinePassed();
    error BoringOnChainQueue__NotMatured();
    error BoringOnChainQueue__Keccak256Collision();
    error BoringOnChainQueue__RequestNotFound();
    error BoringOnChainQueue__PermitFailedAndAllowanceTooLow();
    error BoringOnChainQueue__MAX_DISCOUNT();
    error BoringOnChainQueue__MAXIMUM_MINIMUM_SECONDS_TO_DEADLINE();
    error BoringOnChainQueue__SolveAssetMismatch();
    error BoringOnChainQueue__Overflow();
    error BoringOnChainQueue__MAXIMUM_SECONDS_TO_MATURITY();
    error BoringOnChainQueue__BadInput();
    error BoringOnChainQueue__RescueCannotTakeSharesFromActiveRequests();
    error BoringOnChainQueue__NotEnoughWithdrawCapacity();

    //============================== EVENTS ===============================

    event OnChainWithdrawRequested(
        bytes32 indexed requestId,
        address indexed user,
        address indexed assetOut,
        uint96 nonce,
        uint128 amountOfShares,
        uint128 amountOfAssets,
        uint40 creationTime,
        uint24 secondsToMaturity,
        uint24 secondsToDeadline
    );

    event OnChainWithdrawCancelled(bytes32 indexed requestId, address indexed user, uint256 timestamp);

    event OnChainWithdrawSolved(bytes32 indexed requestId, address indexed user, uint256 timestamp);

    event WithdrawAssetStopped(address indexed assetOut);

    event WithdrawAssetUpdated(
        address indexed assetOut,
        uint24 secondsToMaturity,
        uint24 minimumSecondsToDeadline,
        uint16 minDiscount,
        uint16 maxDiscount,
        uint96 minimumShares
    );

    event WithdrawCapacityUpdated(address indexed assetOut, uint256 withdrawCapacity);

    event Paused();

    event Unpaused();

    //============================== IMMUTABLES ===============================

    /**
     * @notice The BoringVault contract to withdraw from.
     */
    BoringVault public immutable boringVault;

    /**
     * @notice The AccountantWithRateProviders contract to get rates from.
     */
    AccountantWithRateProviders public immutable accountant;

    /**
     * @notice One BoringVault share.
     */
    uint256 public immutable ONE_SHARE;

    constructor(address _owner, address _auth, address payable _boringVault, address _accountant)
        Auth(_owner, Authority(_auth))
    {
        boringVault = BoringVault(_boringVault);
        ONE_SHARE = 10 ** boringVault.decimals();
        accountant = AccountantWithRateProviders(_accountant);
    }

    //=============================== ADMIN FUNCTIONS ================================

    /**
     * @notice Allows the owner to rescue tokens from the contract.
     * @dev The owner can only withdraw BoringVault shares if they are accidentally sent to this contract.
     *      Shares from active withdraw requests are not withdrawable.
     * @param token The token to rescue.
     * @param amount The amount to rescue.
     * @param to The address to send the rescued tokens to.
     * @param activeRequests The active withdraw requests, query `getWithdrawRequests`, or read events to get them.
     * @dev Provided activeRequests must match the order of active requests in the queue.
     */
    function rescueTokens(ERC20 token, uint256 amount, address to, OnChainWithdraw[] calldata activeRequests)
        external
        requiresAuth
    {
        if (address(token) == address(boringVault)) {
            bytes32[] memory requestIds = _withdrawRequests.values();
            uint256 requestIdsLength = requestIds.length;
            if (activeRequests.length != requestIdsLength) revert BoringOnChainQueue__BadInput();
            // Iterate through provided activeRequests, and hash each one to compare to the requestIds.
            // Also track the sum of shares to make sure it is less than or equal to the amount.
            uint256 activeRequestShareSum;
            for (uint256 i = 0; i < requestIdsLength; ++i) {
                if (keccak256(abi.encode(activeRequests[i])) != requestIds[i]) revert BoringOnChainQueue__BadInput();
                activeRequestShareSum += activeRequests[i].amountOfShares;
            }
            uint256 freeShares = boringVault.balanceOf(address(this)) - activeRequestShareSum;
            if (amount == type(uint256).max) amount = freeShares;
            else if (amount > freeShares) revert BoringOnChainQueue__RescueCannotTakeSharesFromActiveRequests();
        } else {
            if (amount == type(uint256).max) amount = token.balanceOf(address(this));
        }
        token.safeTransfer(to, amount);
    }

    /**
     * @notice Pause this contract, which prevents future calls to any functions that
     *         create new requests, or solve active requests.
     * @dev Callable by MULTISIG_ROLE.
     */
    function pause() external requiresAuth {
        isPaused = true;
        emit Paused();
    }

    /**
     * @notice Unpause this contract, which allows future calls to any functions that
     *         create new requests, or solve active requests.
     * @dev Callable by MULTISIG_ROLE.
     */
    function unpause() external requiresAuth {
        isPaused = false;
        emit Unpaused();
    }

    /**
     * @notice Update a new withdraw asset or existing.
     * @dev Callable by MULTISIG_ROLE.
     * @param assetOut The asset to withdraw.
     * @param secondsToMaturity The time in seconds it takes for the withdraw to mature.
     * @param minimumSecondsToDeadline The minimum time in seconds a withdraw request must be valid for before it is expired.
     * @param minDiscount The minimum discount allowed for a withdraw request.
     * @param maxDiscount The maximum discount allowed for a withdraw request.
     * @param minimumShares The minimum amount of shares that can be withdrawn.
     */
    function updateWithdrawAsset(
        address assetOut,
        uint24 secondsToMaturity,
        uint24 minimumSecondsToDeadline,
        uint16 minDiscount,
        uint16 maxDiscount,
        uint96 minimumShares
    ) external requiresAuth {
        // Validate input.
        if (maxDiscount > MAX_DISCOUNT) revert BoringOnChainQueue__MAX_DISCOUNT();
        if (secondsToMaturity > MAXIMUM_SECONDS_TO_MATURITY) {
            revert BoringOnChainQueue__MAXIMUM_SECONDS_TO_MATURITY();
        }
        if (minimumSecondsToDeadline > MAXIMUM_MINIMUM_SECONDS_TO_DEADLINE) {
            revert BoringOnChainQueue__MAXIMUM_MINIMUM_SECONDS_TO_DEADLINE();
        }
        if (minDiscount > maxDiscount) revert BoringOnChainQueue__BadDiscount();
        // Make sure accountant can price it.
        accountant.getRateInQuoteSafe(ERC20(assetOut));

        withdrawAssets[assetOut] = WithdrawAsset({
            allowWithdraws: true,
            secondsToMaturity: secondsToMaturity,
            minimumSecondsToDeadline: minimumSecondsToDeadline,
            minDiscount: minDiscount,
            maxDiscount: maxDiscount,
            minimumShares: minimumShares,
            withdrawCapacity: type(uint256).max
        });

        emit WithdrawAssetUpdated(
            assetOut, secondsToMaturity, minimumSecondsToDeadline, minDiscount, maxDiscount, minimumShares
        );
    }

    /**
     * @notice Stop withdraws in an asset.
     * @dev Callable by MULTISIG_ROLE.
     * @param assetOut The asset to stop withdraws in.
     */
    function stopWithdrawsInAsset(address assetOut) external requiresAuth {
        withdrawAssets[assetOut].allowWithdraws = false;
        emit WithdrawAssetStopped(assetOut);
    }

    /**
     * @notice Set the withdraw capacity for an asset.
     * @dev Callable by STRATEGIST_MULTISIG_ROLE.
     * @param assetOut The asset to set the withdraw capacity for.
     * @param withdrawCapacity The new withdraw capacity.
     */
    function setWithdrawCapacity(address assetOut, uint256 withdrawCapacity) external requiresAuth {
        withdrawAssets[assetOut].withdrawCapacity = withdrawCapacity;
        emit WithdrawCapacityUpdated(assetOut, withdrawCapacity);
    }

    /**
     * @notice Cancel multiple user withdraws.
     * @dev Callable by STRATEGIST_MULTISIG_ROLE.
     */
    function cancelUserWithdraws(OnChainWithdraw[] calldata requests)
        external
        requiresAuth
        returns (bytes32[] memory canceledRequestIds)
    {
        uint256 requestsLength = requests.length;
        canceledRequestIds = new bytes32[](requestsLength);
        for (uint256 i = 0; i < requestsLength; ++i) {
            canceledRequestIds[i] = _cancelOnChainWithdraw(requests[i]);
        }
    }

    //=============================== USER FUNCTIONS ================================

    /**
     * @notice Request an on-chain withdraw.
     * @param assetOut The asset to withdraw.
     * @param amountOfShares The amount of shares to withdraw.
     * @param discount The discount to apply to the withdraw in bps.
     * @param secondsToDeadline The time in seconds the request is valid for.
     * @return requestId The request Id.
     */
    function requestOnChainWithdraw(address assetOut, uint128 amountOfShares, uint16 discount, uint24 secondsToDeadline)
        external
        virtual
        requiresAuth
        returns (bytes32 requestId)
    {
        _decrementWithdrawCapacity(assetOut, amountOfShares);
        WithdrawAsset memory withdrawAsset = withdrawAssets[assetOut];

        _beforeNewRequest(withdrawAsset, amountOfShares, discount, secondsToDeadline);

        boringVault.safeTransferFrom(msg.sender, address(this), amountOfShares);

        (requestId,) = _queueOnChainWithdraw(
            msg.sender, assetOut, amountOfShares, discount, withdrawAsset.secondsToMaturity, secondsToDeadline
        );
    }

    /**
     * @notice Request an on-chain withdraw with permit.
     * @param assetOut The asset to withdraw.
     * @param amountOfShares The amount of shares to withdraw.
     * @param discount The discount to apply to the withdraw in bps.
     * @param secondsToDeadline The time in seconds the request is valid for.
     * @param permitDeadline The deadline for the permit.
     * @param v The v value of the permit signature.
     * @param r The r value of the permit signature.
     * @param s The s value of the permit signature.
     * @return requestId The request Id.
     */
    function requestOnChainWithdrawWithPermit(
        address assetOut,
        uint128 amountOfShares,
        uint16 discount,
        uint24 secondsToDeadline,
        uint256 permitDeadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external virtual requiresAuth returns (bytes32 requestId) {
        _decrementWithdrawCapacity(assetOut, amountOfShares);
        WithdrawAsset memory withdrawAsset = withdrawAssets[assetOut];

        _beforeNewRequest(withdrawAsset, amountOfShares, discount, secondsToDeadline);

        try boringVault.permit(msg.sender, address(this), amountOfShares, permitDeadline, v, r, s) {}
        catch {
            if (boringVault.allowance(msg.sender, address(this)) < amountOfShares) {
                revert BoringOnChainQueue__PermitFailedAndAllowanceTooLow();
            }
        }

        boringVault.safeTransferFrom(msg.sender, address(this), amountOfShares);

        (requestId,) = _queueOnChainWithdraw(
            msg.sender, assetOut, amountOfShares, discount, withdrawAsset.secondsToMaturity, secondsToDeadline
        );
    }

    /**
     * @notice Cancel an on-chain withdraw.
     * @param request The request to cancel.
     * @return requestId The request Id.
     */
    function cancelOnChainWithdraw(OnChainWithdraw memory request)
        external
        virtual
        requiresAuth
        returns (bytes32 requestId)
    {
        requestId = _cancelOnChainWithdrawWithUserCheck(request);
    }

    /**
     * @notice Replace an on-chain withdraw.
     * @param oldRequest The request to replace.
     * @param discount The discount to apply to the new withdraw request in bps.
     * @param secondsToDeadline The time in seconds the new withdraw request is valid for.
     * @return oldRequestId The request Id of the old withdraw request.
     * @return newRequestId The request Id of the new withdraw request.
     */
    function replaceOnChainWithdraw(OnChainWithdraw memory oldRequest, uint16 discount, uint24 secondsToDeadline)
        external
        virtual
        requiresAuth
        returns (bytes32 oldRequestId, bytes32 newRequestId)
    {
        (oldRequestId, newRequestId) = _replaceOnChainWithdraw(oldRequest, discount, secondsToDeadline);
    }

    //============================== SOLVER FUNCTIONS ===============================

    /**
     * @notice Solve multiple on-chain withdraws.
     * @dev If `solveData` is empty, this contract will skip the callback function.
     * @param requests The requests to solve.
     * @param solveData The data to use to solve the requests.
     * @param solver The address of the solver.
     */
    function solveOnChainWithdraws(OnChainWithdraw[] calldata requests, bytes calldata solveData, address solver)
        external
        requiresAuth
    {
        if (isPaused) revert BoringOnChainQueue__Paused();

        ERC20 solveAsset = ERC20(requests[0].assetOut);
        uint256 requiredAssets;
        uint256 totalShares;
        uint256 requestsLength = requests.length;
        for (uint256 i = 0; i < requestsLength; ++i) {
            if (address(solveAsset) != requests[i].assetOut) revert BoringOnChainQueue__SolveAssetMismatch();
            uint256 maturity = requests[i].creationTime + requests[i].secondsToMaturity;
            if (block.timestamp < maturity) revert BoringOnChainQueue__NotMatured();
            uint256 deadline = maturity + requests[i].secondsToDeadline;
            if (block.timestamp > deadline) revert BoringOnChainQueue__DeadlinePassed();
            requiredAssets += requests[i].amountOfAssets;
            totalShares += requests[i].amountOfShares;
            bytes32 requestId = _dequeueOnChainWithdraw(requests[i]);
            emit OnChainWithdrawSolved(requestId, requests[i].user, block.timestamp);
        }

        // Transfer shares to solver.
        boringVault.safeTransfer(solver, totalShares);

        // Run callback function if data is provided.
        if (solveData.length > 0) {
            IBoringSolver(solver).boringSolve(
                msg.sender, address(boringVault), address(solveAsset), totalShares, requiredAssets, solveData
            );
        }

        for (uint256 i = 0; i < requestsLength; ++i) {
            solveAsset.safeTransferFrom(solver, requests[i].user, requests[i].amountOfAssets);
        }
    }

    //============================== VIEW FUNCTIONS ===============================

    /**
     * @notice Get all request Ids currently in the queue.
     * @dev Includes requests that are not mature, matured, and expired. But does not include requests that have been solved.
     * @return requestIds The request Ids.
     */
    function getRequestIds() public view returns (bytes32[] memory) {
        return _withdrawRequests.values();
    }

    /**
     * @notice Get the request Id for a request.
     * @param request The request.
     * @return requestId The request Id.
     */
    function getRequestId(OnChainWithdraw calldata request) external pure returns (bytes32 requestId) {
        return keccak256(abi.encode(request));
    }

    /**
     * @notice Preview assets out from a withdraw request.
     */
    function previewAssetsOut(address assetOut, uint128 amountOfShares, uint16 discount)
        public
        view
        returns (uint128 amountOfAssets128)
    {
        uint256 price = accountant.getRateInQuoteSafe(ERC20(assetOut));
        price = price.mulDivDown(1e4 - discount, 1e4);
        uint256 amountOfAssets = uint256(amountOfShares).mulDivDown(price, ONE_SHARE);
        if (amountOfAssets > type(uint128).max) revert BoringOnChainQueue__Overflow();
        amountOfAssets128 = uint128(amountOfAssets);
    }

    //============================= INTERNAL FUNCTIONS ==============================

    /**
     * @notice Before a new request is made, validate the input.
     * @param withdrawAsset The withdraw asset.
     * @param amountOfShares The amount of shares to withdraw.
     * @param discount The discount to apply to the withdraw in bps.
     * @param secondsToDeadline The time in seconds the request is valid for.
     */
    function _beforeNewRequest(
        WithdrawAsset memory withdrawAsset,
        uint128 amountOfShares,
        uint16 discount,
        uint24 secondsToDeadline
    ) internal view virtual {
        if (isPaused) revert BoringOnChainQueue__Paused();

        if (!withdrawAsset.allowWithdraws) revert BoringOnChainQueue__WithdrawsNotAllowedForAsset();
        if (discount < withdrawAsset.minDiscount || discount > withdrawAsset.maxDiscount) {
            revert BoringOnChainQueue__BadDiscount();
        }
        if (amountOfShares < withdrawAsset.minimumShares) revert BoringOnChainQueue__BadShareAmount();
        if (secondsToDeadline < withdrawAsset.minimumSecondsToDeadline) revert BoringOnChainQueue__BadDeadline();
    }

    /**
     * @notice Cancel an on-chain withdraw.
     * @dev Verifies that the request user is the same as the msg.sender.
     * @param request The request to cancel.
     * @return requestId The request Id.
     */
    function _cancelOnChainWithdrawWithUserCheck(OnChainWithdraw memory request)
        internal
        virtual
        onlyRequestUser(request.user, msg.sender)
        returns (bytes32 requestId)
    {
        requestId = _cancelOnChainWithdraw(request);
    }

    /**
     * @notice Cancel an on-chain withdraw.
     * @param request The request to cancel.
     * @return requestId The request Id.
     */
    function _cancelOnChainWithdraw(OnChainWithdraw memory request) internal virtual returns (bytes32 requestId) {
        requestId = _dequeueOnChainWithdraw(request);
        _incrementWithdrawCapacity(request.assetOut, request.amountOfShares);
        boringVault.safeTransfer(request.user, request.amountOfShares);
        emit OnChainWithdrawCancelled(requestId, request.user, block.timestamp);
    }

    /**
     * @notice Replace an on-chain withdraw.
     * @dev Does not check withdraw capacity since it is replacing an existing request.
     * @param oldRequest The request to replace.
     * @param discount The discount to apply to the new withdraw request in bps.
     * @param secondsToDeadline The time in seconds the new withdraw request is valid for.
     * @return oldRequestId The request Id of the old withdraw request.
     * @return newRequestId The request Id of the new withdraw request.
     */
    function _replaceOnChainWithdraw(OnChainWithdraw memory oldRequest, uint16 discount, uint24 secondsToDeadline)
        internal
        virtual
        onlyRequestUser(oldRequest.user, msg.sender)
        returns (bytes32 oldRequestId, bytes32 newRequestId)
    {
        WithdrawAsset memory withdrawAsset = withdrawAssets[oldRequest.assetOut];

        _beforeNewRequest(withdrawAsset, oldRequest.amountOfShares, discount, secondsToDeadline);

        oldRequestId = _dequeueOnChainWithdraw(oldRequest);

        emit OnChainWithdrawCancelled(oldRequestId, oldRequest.user, block.timestamp);

        // Create new request.
        (newRequestId,) = _queueOnChainWithdraw(
            oldRequest.user,
            oldRequest.assetOut,
            oldRequest.amountOfShares,
            discount,
            withdrawAsset.secondsToMaturity,
            secondsToDeadline
        );
    }

    /**
     * @notice Decrement the withdraw capacity for an asset.
     * @param assetOut The asset to decrement the withdraw capacity for.
     * @param amountOfShares The amount of shares to decrement the withdraw capacity for.
     */
    function _decrementWithdrawCapacity(address assetOut, uint256 amountOfShares) internal {
        WithdrawAsset storage withdrawAsset = withdrawAssets[assetOut];
        if (withdrawAsset.withdrawCapacity < type(uint256).max) {
            if (withdrawAsset.withdrawCapacity < amountOfShares) revert BoringOnChainQueue__NotEnoughWithdrawCapacity();
            withdrawAsset.withdrawCapacity -= amountOfShares;
            emit WithdrawCapacityUpdated(assetOut, withdrawAsset.withdrawCapacity);
        }
    }

    /**
     * @notice Increment the withdraw capacity for an asset.
     * @param assetOut The asset to increment the withdraw capacity for.
     * @param amountOfShares The amount of shares to increment the withdraw capacity for.
     */
    function _incrementWithdrawCapacity(address assetOut, uint256 amountOfShares) internal {
        WithdrawAsset storage withdrawAsset = withdrawAssets[assetOut];
        if (withdrawAsset.withdrawCapacity < type(uint256).max) {
            withdrawAsset.withdrawCapacity += amountOfShares;
            emit WithdrawCapacityUpdated(assetOut, withdrawAsset.withdrawCapacity);
        }
    }

    /**
     * @notice Queue an on-chain withdraw.
     * @dev Reverts if the request is already in the queue. Though this should be impossible.
     * @param user The user that made the request.
     * @param assetOut The asset to withdraw.
     * @param amountOfShares The amount of shares to withdraw.
     * @param discount The discount to apply to the withdraw in bps.
     * @param secondsToMaturity The time in seconds it takes for the asset to mature.
     * @param secondsToDeadline The time in seconds the request is valid for.
     * @return requestId The request Id.
     */
    function _queueOnChainWithdraw(
        address user,
        address assetOut,
        uint128 amountOfShares,
        uint16 discount,
        uint24 secondsToMaturity,
        uint24 secondsToDeadline
    ) internal virtual returns (bytes32 requestId, OnChainWithdraw memory req) {
        // Create new request.
        uint96 requestNonce;
        // See nonce definition for unchecked safety.
        unchecked {
            // Set request nonce as current nonce, then increment nonce.
            requestNonce = nonce++;
        }

        uint128 amountOfAssets128 = previewAssetsOut(assetOut, amountOfShares, discount);

        uint40 timeNow = uint40(block.timestamp); // Safe to cast to uint40 as it won't overflow for 10s of thousands of years
        req = OnChainWithdraw({
            nonce: requestNonce,
            user: user,
            assetOut: assetOut,
            amountOfShares: amountOfShares,
            amountOfAssets: amountOfAssets128,
            creationTime: timeNow,
            secondsToMaturity: secondsToMaturity,
            secondsToDeadline: secondsToDeadline
        });

        requestId = keccak256(abi.encode(req));

        bool addedToSet = _withdrawRequests.add(requestId);

        if (!addedToSet) revert BoringOnChainQueue__Keccak256Collision();

        emit OnChainWithdrawRequested(
            requestId,
            user,
            assetOut,
            requestNonce,
            amountOfShares,
            amountOfAssets128,
            timeNow,
            secondsToMaturity,
            secondsToDeadline
        );
    }

    /**
     * @notice Dequeue an on-chain withdraw.
     * @dev Reverts if the request is not in the queue.
     * @dev Does not remove the request from the onChainWithdraws mapping, so that
     *      it can be referenced later by off-chain systems if needed.
     * @param request The request to dequeue.
     * @return requestId The request Id.
     */
    function _dequeueOnChainWithdraw(OnChainWithdraw memory request) internal virtual returns (bytes32 requestId) {
        // Remove request from queue.
        requestId = keccak256(abi.encode(request));
        bool removedFromSet = _withdrawRequests.remove(requestId);
        if (!removedFromSet) revert BoringOnChainQueue__RequestNotFound();
    }
}

// SPDX-License-Identifier: AGPL-3.0-only
pragma solidity >=0.8.0;

/// @notice Modern and gas efficient ERC20 + EIP-2612 implementation.
/// @author Solmate (https://github.com/transmissions11/solmate/blob/main/src/tokens/ERC20.sol)
/// @author Modified from Uniswap (https://github.com/Uniswap/uniswap-v2-core/blob/master/contracts/UniswapV2ERC20.sol)
/// @dev Do not manually set balances without updating totalSupply, as the sum of all user balances must not exceed it.
abstract contract ERC20 {
    /*//////////////////////////////////////////////////////////////
                                 EVENTS
    //////////////////////////////////////////////////////////////*/

    event Transfer(address indexed from, address indexed to, uint256 amount);

    event Approval(address indexed owner, address indexed spender, uint256 amount);

    /*//////////////////////////////////////////////////////////////
                            METADATA STORAGE
    //////////////////////////////////////////////////////////////*/

    string public name;

    string public symbol;

    uint8 public immutable decimals;

    /*//////////////////////////////////////////////////////////////
                              ERC20 STORAGE
    //////////////////////////////////////////////////////////////*/

    uint256 public totalSupply;

    mapping(address => uint256) public balanceOf;

    mapping(address => mapping(address => uint256)) public allowance;

    /*//////////////////////////////////////////////////////////////
                            EIP-2612 STORAGE
    //////////////////////////////////////////////////////////////*/

    uint256 internal immutable INITIAL_CHAIN_ID;

    bytes32 internal immutable INITIAL_DOMAIN_SEPARATOR;

    mapping(address => uint256) public nonces;

    /*//////////////////////////////////////////////////////////////
                               CONSTRUCTOR
    //////////////////////////////////////////////////////////////*/

    constructor(
        string memory _name,
        string memory _symbol,
        uint8 _decimals
    ) {
        name = _name;
        symbol = _symbol;
        decimals = _decimals;

        INITIAL_CHAIN_ID = block.chainid;
        INITIAL_DOMAIN_SEPARATOR = computeDomainSeparator();
    }

    /*//////////////////////////////////////////////////////////////
                               ERC20 LOGIC
    //////////////////////////////////////////////////////////////*/

    function approve(address spender, uint256 amount) public virtual returns (bool) {
        allowance[msg.sender][spender] = amount;

        emit Approval(msg.sender, spender, amount);

        return true;
    }

    function transfer(address to, uint256 amount) public virtual returns (bool) {
        balanceOf[msg.sender] -= amount;

        // Cannot overflow because the sum of all user
        // balances can't exceed the max uint256 value.
        unchecked {
            balanceOf[to] += amount;
        }

        emit Transfer(msg.sender, to, amount);

        return true;
    }

    function transferFrom(
        address from,
        address to,
        uint256 amount
    ) public virtual returns (bool) {
        uint256 allowed = allowance[from][msg.sender]; // Saves gas for limited approvals.

        if (allowed != type(uint256).max) allowance[from][msg.sender] = allowed - amount;

        balanceOf[from] -= amount;

        // Cannot overflow because the sum of all user
        // balances can't exceed the max uint256 value.
        unchecked {
            balanceOf[to] += amount;
        }

        emit Transfer(from, to, amount);

        return true;
    }

    /*//////////////////////////////////////////////////////////////
                             EIP-2612 LOGIC
    //////////////////////////////////////////////////////////////*/

    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) public virtual {
        require(deadline >= block.timestamp, "PERMIT_DEADLINE_EXPIRED");

        // Unchecked because the only math done is incrementing
        // the owner's nonce which cannot realistically overflow.
        unchecked {
            address recoveredAddress = ecrecover(
                keccak256(
                    abi.encodePacked(
                        "\x19\x01",
                        DOMAIN_SEPARATOR(),
                        keccak256(
                            abi.encode(
                                keccak256(
                                    "Permit(address owner,address spender,uint256 value,uint256 nonce,uint256 deadline)"
                                ),
                                owner,
                                spender,
                                value,
                                nonces[owner]++,
                                deadline
                            )
                        )
                    )
                ),
                v,
                r,
                s
            );

            require(recoveredAddress != address(0) && recoveredAddress == owner, "INVALID_SIGNER");

            allowance[recoveredAddress][spender] = value;
        }

        emit Approval(owner, spender, value);
    }

    function DOMAIN_SEPARATOR() public view virtual returns (bytes32) {
        return block.chainid == INITIAL_CHAIN_ID ? INITIAL_DOMAIN_SEPARATOR : computeDomainSeparator();
    }

    function computeDomainSeparator() internal view virtual returns (bytes32) {
        return
            keccak256(
                abi.encode(
                    keccak256("EIP712Domain(string name,string version,uint256 chainId,address verifyingContract)"),
                    keccak256(bytes(name)),
                    keccak256("1"),
                    block.chainid,
                    address(this)
                )
            );
    }

    /*//////////////////////////////////////////////////////////////
                        INTERNAL MINT/BURN LOGIC
    //////////////////////////////////////////////////////////////*/

    function _mint(address to, uint256 amount) internal virtual {
        totalSupply += amount;

        // Cannot overflow because the sum of all user
        // balances can't exceed the max uint256 value.
        unchecked {
            balanceOf[to] += amount;
        }

        emit Transfer(address(0), to, amount);
    }

    function _burn(address from, uint256 amount) internal virtual {
        balanceOf[from] -= amount;

        // Cannot underflow because a user's balance
        // will never be larger than the total supply.
        unchecked {
            totalSupply -= amount;
        }

        emit Transfer(from, address(0), amount);
    }
}

// SPDX-License-Identifier: AGPL-3.0-only
pragma solidity >=0.8.0;

import {ERC20} from "./ERC20.sol";

import {SafeTransferLib} from "../utils/SafeTransferLib.sol";

/// @notice Minimalist and modern Wrapped Ether implementation.
/// @author Solmate (https://github.com/transmissions11/solmate/blob/main/src/tokens/WETH.sol)
/// @author Inspired by WETH9 (https://github.com/dapphub/ds-weth/blob/master/src/weth9.sol)
contract WETH is ERC20("Wrapped Ether", "WETH", 18) {
    using SafeTransferLib for address;

    event Deposit(address indexed from, uint256 amount);

    event Withdrawal(address indexed to, uint256 amount);

    function deposit() public payable virtual {
        _mint(msg.sender, msg.value);

        emit Deposit(msg.sender, msg.value);
    }

    function withdraw(uint256 amount) public virtual {
        _burn(msg.sender, amount);

        emit Withdrawal(msg.sender, amount);

        msg.sender.safeTransferETH(amount);
    }

    receive() external payable virtual {
        deposit();
    }
}

// SPDX-License-Identifier: SEL-1.0
// Copyright © 2025 Veda Tech Labs
// Derived from Boring Vault Software © 2025 Veda Tech Labs (TEST ONLY – NO COMMERCIAL USE)
// Licensed under Software Evaluation License, Version 1.0
pragma solidity 0.8.21;

import {Address} from "@openzeppelin/contracts/utils/Address.sol";
import {ERC721Holder} from "@openzeppelin/contracts/token/ERC721/utils/ERC721Holder.sol";
import {ERC1155Holder} from "@openzeppelin/contracts/token/ERC1155/utils/ERC1155Holder.sol";
import {FixedPointMathLib} from "@solmate/utils/FixedPointMathLib.sol";
import {SafeTransferLib} from "@solmate/utils/SafeTransferLib.sol";
import {ERC20} from "@solmate/tokens/ERC20.sol";
import {BeforeTransferHook} from "src/interfaces/BeforeTransferHook.sol";
import {Auth, Authority} from "@solmate/auth/Auth.sol";

contract BoringVault is ERC20, Auth, ERC721Holder, ERC1155Holder {
    using Address for address;
    using SafeTransferLib for ERC20;
    using FixedPointMathLib for uint256;

    // ========================================= STATE =========================================

    /**
     * @notice Contract responsbile for implementing `beforeTransfer`.
     */
    BeforeTransferHook public hook;

    //============================== EVENTS ===============================

    event Enter(address indexed from, address indexed asset, uint256 amount, address indexed to, uint256 shares);
    event Exit(address indexed to, address indexed asset, uint256 amount, address indexed from, uint256 shares);

    //============================== CONSTRUCTOR ===============================

    constructor(address _owner, string memory _name, string memory _symbol, uint8 _decimals)
        ERC20(_name, _symbol, _decimals)
        Auth(_owner, Authority(address(0)))
    {}

    //============================== MANAGE ===============================

    /**
     * @notice Allows manager to make an arbitrary function call from this contract.
     * @dev Callable by MANAGER_ROLE.
     */
    function manage(address target, bytes calldata data, uint256 value)
        external
        requiresAuth
        returns (bytes memory result)
    {
        result = target.functionCallWithValue(data, value);
    }

    /**
     * @notice Allows manager to make arbitrary function calls from this contract.
     * @dev Callable by MANAGER_ROLE.
     */
    function manage(address[] calldata targets, bytes[] calldata data, uint256[] calldata values)
        external
        requiresAuth
        returns (bytes[] memory results)
    {
        uint256 targetsLength = targets.length;
        results = new bytes[](targetsLength);
        for (uint256 i; i < targetsLength; ++i) {
            results[i] = targets[i].functionCallWithValue(data[i], values[i]);
        }
    }

    //============================== ENTER ===============================

    /**
     * @notice Allows minter to mint shares, in exchange for assets.
     * @dev If assetAmount is zero, no assets are transferred in.
     * @dev Callable by MINTER_ROLE.
     */
    function enter(address from, ERC20 asset, uint256 assetAmount, address to, uint256 shareAmount)
        external
        requiresAuth
    {
        // Transfer assets in
        if (assetAmount > 0) asset.safeTransferFrom(from, address(this), assetAmount);

        // Mint shares.
        _mint(to, shareAmount);

        emit Enter(from, address(asset), assetAmount, to, shareAmount);
    }

    //============================== EXIT ===============================

    /**
     * @notice Allows burner to burn shares, in exchange for assets.
     * @dev If assetAmount is zero, no assets are transferred out.
     * @dev Callable by BURNER_ROLE.
     */
    function exit(address to, ERC20 asset, uint256 assetAmount, address from, uint256 shareAmount)
        external
        requiresAuth
    {
        // Burn shares.
        _burn(from, shareAmount);

        // Transfer assets out.
        if (assetAmount > 0) asset.safeTransfer(to, assetAmount);

        emit Exit(to, address(asset), assetAmount, from, shareAmount);
    }

    //============================== BEFORE TRANSFER HOOK ===============================
    /**
     * @notice Sets the share locker.
     * @notice If set to zero address, the share locker logic is disabled.
     * @dev Callable by OWNER_ROLE.
     */
    function setBeforeTransferHook(address _hook) external requiresAuth {
        hook = BeforeTransferHook(_hook);
    }

    /**
     * @notice Call `beforeTransferHook` passing in `from` `to`, and `msg.sender`.
     */
    function _callBeforeTransfer(address from, address to) internal view {
        if (address(hook) != address(0)) hook.beforeTransfer(from, to, msg.sender);
    }

    function transfer(address to, uint256 amount) public override returns (bool) {
        _callBeforeTransfer(msg.sender, to);
        return super.transfer(to, amount);
    }

    function transferFrom(address from, address to, uint256 amount) public override returns (bool) {
        _callBeforeTransfer(from, to);
        return super.transferFrom(from, to, amount);
    }

    //============================== RECEIVE ===============================

    receive() external payable {}
}

// SPDX-License-Identifier: SEL-1.0
// Copyright © 2025 Veda Tech Labs
// Derived from Boring Vault Software © 2025 Veda Tech Labs (TEST ONLY – NO COMMERCIAL USE)
// Licensed under Software Evaluation License, Version 1.0
pragma solidity 0.8.21;

import {FixedPointMathLib} from "@solmate/utils/FixedPointMathLib.sol";
import {IRateProvider} from "src/interfaces/IRateProvider.sol";
import {ERC20} from "@solmate/tokens/ERC20.sol";
import {SafeTransferLib} from "@solmate/utils/SafeTransferLib.sol";
import {BoringVault} from "src/base/BoringVault.sol";
import {Auth, Authority} from "@solmate/auth/Auth.sol";
import {IPausable} from "src/interfaces/IPausable.sol";

contract AccountantWithRateProviders is Auth, IRateProvider, IPausable {
    using FixedPointMathLib for uint256;
    using SafeTransferLib for ERC20;

    // ========================================= STRUCTS =========================================

    /**
     * @param payoutAddress the address `claimFees` sends fees to
     * @param highwaterMark the highest value of the BoringVault's share price
     * @param feesOwedInBase total pending fees owed in terms of base
     * @param totalSharesLastUpdate total amount of shares the last exchange rate update
     * @param exchangeRate the current exchange rate in terms of base
     * @param allowedExchangeRateChangeUpper the max allowed change to exchange rate from an update
     * @param allowedExchangeRateChangeLower the min allowed change to exchange rate from an update
     * @param lastUpdateTimestamp the block timestamp of the last exchange rate update
     * @param isPaused whether or not this contract is paused
     * @param minimumUpdateDelayInSeconds the minimum amount of time that must pass between
     *        exchange rate updates, such that the update won't trigger the contract to be paused
     * @param platformFee the platform fee
     * @param performanceFee the performance fee
     */
    struct AccountantState {
        address payoutAddress;
        uint96 highwaterMark;
        uint128 feesOwedInBase;
        uint128 totalSharesLastUpdate;
        uint96 exchangeRate;
        uint16 allowedExchangeRateChangeUpper;
        uint16 allowedExchangeRateChangeLower;
        uint64 lastUpdateTimestamp;
        bool isPaused;
        uint24 minimumUpdateDelayInSeconds;
        uint16 platformFee;
        uint16 performanceFee;
    }

    /**
     * @param isPeggedToBase whether or not the asset is 1:1 with the base asset
     * @param rateProvider the rate provider for this asset if `isPeggedToBase` is false
     */
    struct RateProviderData {
        bool isPeggedToBase;
        IRateProvider rateProvider;
    }

    // ========================================= STATE =========================================

    /**
     * @notice Store the accountant state in 3 packed slots.
     */
    AccountantState public accountantState;

    /**
     * @notice Maps ERC20s to their RateProviderData.
     */
    mapping(ERC20 => RateProviderData) public rateProviderData;

    //============================== ERRORS ===============================

    error AccountantWithRateProviders__UpperBoundTooSmall();
    error AccountantWithRateProviders__LowerBoundTooLarge();
    error AccountantWithRateProviders__PlatformFeeTooLarge();
    error AccountantWithRateProviders__PerformanceFeeTooLarge();
    error AccountantWithRateProviders__Paused();
    error AccountantWithRateProviders__ZeroFeesOwed();
    error AccountantWithRateProviders__OnlyCallableByBoringVault();
    error AccountantWithRateProviders__UpdateDelayTooLarge();
    error AccountantWithRateProviders__ExchangeRateAboveHighwaterMark();

    //============================== EVENTS ===============================

    event Paused();
    event Unpaused();
    event DelayInSecondsUpdated(uint24 oldDelay, uint24 newDelay);
    event UpperBoundUpdated(uint16 oldBound, uint16 newBound);
    event LowerBoundUpdated(uint16 oldBound, uint16 newBound);
    event PlatformFeeUpdated(uint16 oldFee, uint16 newFee);
    event PerformanceFeeUpdated(uint16 oldFee, uint16 newFee);
    event PayoutAddressUpdated(address oldPayout, address newPayout);
    event RateProviderUpdated(address asset, bool isPegged, address rateProvider);
    event ExchangeRateUpdated(uint96 oldRate, uint96 newRate, uint64 currentTime);
    event FeesClaimed(address indexed feeAsset, uint256 amount);
    event HighwaterMarkReset();

    //============================== IMMUTABLES ===============================

    /**
     * @notice The base asset rates are provided in.
     */
    ERC20 public immutable base;

    /**
     * @notice The decimals rates are provided in.
     */
    uint8 public immutable decimals;

    /**
     * @notice The BoringVault this accountant is working with.
     *         Used to determine share supply for fee calculation.
     */
    BoringVault public immutable vault;

    /**
     * @notice One share of the BoringVault.
     */
    uint256 internal immutable ONE_SHARE;

    constructor(
        address _owner,
        address _vault,
        address payoutAddress,
        uint96 startingExchangeRate,
        address _base,
        uint16 allowedExchangeRateChangeUpper,
        uint16 allowedExchangeRateChangeLower,
        uint24 minimumUpdateDelayInSeconds,
        uint16 platformFee,
        uint16 performanceFee
    ) Auth(_owner, Authority(address(0))) {
        base = ERC20(_base);
        decimals = ERC20(_base).decimals();
        vault = BoringVault(payable(_vault));
        ONE_SHARE = 10 ** vault.decimals();
        accountantState = AccountantState({
            payoutAddress: payoutAddress,
            highwaterMark: startingExchangeRate,
            feesOwedInBase: 0,
            totalSharesLastUpdate: uint128(vault.totalSupply()),
            exchangeRate: startingExchangeRate,
            allowedExchangeRateChangeUpper: allowedExchangeRateChangeUpper,
            allowedExchangeRateChangeLower: allowedExchangeRateChangeLower,
            lastUpdateTimestamp: uint64(block.timestamp),
            isPaused: false,
            minimumUpdateDelayInSeconds: minimumUpdateDelayInSeconds,
            platformFee: platformFee,
            performanceFee: performanceFee
        });
    }

    // ========================================= ADMIN FUNCTIONS =========================================
    /**
     * @notice Pause this contract, which prevents future calls to `updateExchangeRate`, and any safe rate
     *         calls will revert.
     * @dev Callable by MULTISIG_ROLE.
     */
    function pause() external requiresAuth {
        accountantState.isPaused = true;
        emit Paused();
    }

    /**
     * @notice Unpause this contract, which allows future calls to `updateExchangeRate`, and any safe rate
     *         calls will stop reverting.
     * @dev Callable by MULTISIG_ROLE.
     */
    function unpause() external requiresAuth {
        accountantState.isPaused = false;
        emit Unpaused();
    }

    /**
     * @notice Update the minimum time delay between `updateExchangeRate` calls.
     * @dev There are no input requirements, as it is possible the admin would want
     *      the exchange rate updated as frequently as needed.
     * @dev Callable by OWNER_ROLE.
     */
    function updateDelay(uint24 minimumUpdateDelayInSeconds) external requiresAuth {
        if (minimumUpdateDelayInSeconds > 14 days) revert AccountantWithRateProviders__UpdateDelayTooLarge();
        uint24 oldDelay = accountantState.minimumUpdateDelayInSeconds;
        accountantState.minimumUpdateDelayInSeconds = minimumUpdateDelayInSeconds;
        emit DelayInSecondsUpdated(oldDelay, minimumUpdateDelayInSeconds);
    }

    /**
     * @notice Update the allowed upper bound change of exchange rate between `updateExchangeRateCalls`.
     * @dev Callable by OWNER_ROLE.
     */
    function updateUpper(uint16 allowedExchangeRateChangeUpper) external requiresAuth {
        if (allowedExchangeRateChangeUpper < 1e4) revert AccountantWithRateProviders__UpperBoundTooSmall();
        uint16 oldBound = accountantState.allowedExchangeRateChangeUpper;
        accountantState.allowedExchangeRateChangeUpper = allowedExchangeRateChangeUpper;
        emit UpperBoundUpdated(oldBound, allowedExchangeRateChangeUpper);
    }

    /**
     * @notice Update the allowed lower bound change of exchange rate between `updateExchangeRateCalls`.
     * @dev Callable by OWNER_ROLE.
     */
    function updateLower(uint16 allowedExchangeRateChangeLower) external requiresAuth {
        if (allowedExchangeRateChangeLower > 1e4) revert AccountantWithRateProviders__LowerBoundTooLarge();
        uint16 oldBound = accountantState.allowedExchangeRateChangeLower;
        accountantState.allowedExchangeRateChangeLower = allowedExchangeRateChangeLower;
        emit LowerBoundUpdated(oldBound, allowedExchangeRateChangeLower);
    }

    /**
     * @notice Update the platform fee to a new value.
     * @dev Callable by OWNER_ROLE.
     */
    function updatePlatformFee(uint16 platformFee) external requiresAuth {
        if (platformFee > 0.2e4) revert AccountantWithRateProviders__PlatformFeeTooLarge();
        uint16 oldFee = accountantState.platformFee;
        accountantState.platformFee = platformFee;
        emit PlatformFeeUpdated(oldFee, platformFee);
    }

    /**
     * @notice Update the performance fee to a new value.
     * @dev Callable by OWNER_ROLE.
     */
    function updatePerformanceFee(uint16 performanceFee) external requiresAuth {
        if (performanceFee > 0.5e4) revert AccountantWithRateProviders__PerformanceFeeTooLarge();
        uint16 oldFee = accountantState.performanceFee;
        accountantState.performanceFee = performanceFee;
        emit PerformanceFeeUpdated(oldFee, performanceFee);
    }

    /**
     * @notice Update the payout address fees are sent to.
     * @dev Callable by OWNER_ROLE.
     */
    function updatePayoutAddress(address payoutAddress) external requiresAuth {
        address oldPayout = accountantState.payoutAddress;
        accountantState.payoutAddress = payoutAddress;
        emit PayoutAddressUpdated(oldPayout, payoutAddress);
    }

    /**
     * @notice Update the rate provider data for a specific `asset`.
     * @dev Rate providers must return rates in terms of `base` or
     * an asset pegged to base and they must use the same decimals
     * as `asset`.
     * @dev Callable by OWNER_ROLE.
     */
    function setRateProviderData(ERC20 asset, bool isPeggedToBase, address rateProvider) external requiresAuth {
        rateProviderData[asset] =
            RateProviderData({isPeggedToBase: isPeggedToBase, rateProvider: IRateProvider(rateProvider)});
        emit RateProviderUpdated(address(asset), isPeggedToBase, rateProvider);
    }

    /**
     * @notice Reset the highwater mark to the current exchange rate.
     * @dev Callable by OWNER_ROLE.
     */
    function resetHighwaterMark() external virtual requiresAuth {
        AccountantState storage state = accountantState;

        if (state.exchangeRate > state.highwaterMark) {
            revert AccountantWithRateProviders__ExchangeRateAboveHighwaterMark();
        }

        uint64 currentTime = uint64(block.timestamp);
        uint256 currentTotalShares = vault.totalSupply();
        _calculateFeesOwed(state, state.exchangeRate, state.exchangeRate, currentTotalShares, currentTime);
        state.totalSharesLastUpdate = uint128(currentTotalShares);
        state.highwaterMark = accountantState.exchangeRate;
        state.lastUpdateTimestamp = currentTime;

        emit HighwaterMarkReset();
    }

    // ========================================= UPDATE EXCHANGE RATE/FEES FUNCTIONS =========================================

    /**
     * @notice Updates this contract exchangeRate.
     * @dev If new exchange rate is outside of accepted bounds, or if not enough time has passed, this
     *      will pause the contract, and this function will NOT calculate fees owed.
     * @dev Callable by UPDATE_EXCHANGE_RATE_ROLE.
     */
    function updateExchangeRate(uint96 newExchangeRate) external virtual requiresAuth {
        (
            bool shouldPause,
            AccountantState storage state,
            uint64 currentTime,
            uint256 currentExchangeRate,
            uint256 currentTotalShares
        ) = _beforeUpdateExchangeRate(newExchangeRate);
        if (shouldPause) {
            // Instead of reverting, pause the contract. This way the exchange rate updater is able to update the exchange rate
            // to a better value, and pause it.
            state.isPaused = true;
        } else {
            _calculateFeesOwed(state, newExchangeRate, currentExchangeRate, currentTotalShares, currentTime);
        }

        newExchangeRate = _setExchangeRate(newExchangeRate, state);
        state.totalSharesLastUpdate = uint128(currentTotalShares);
        state.lastUpdateTimestamp = currentTime;

        emit ExchangeRateUpdated(uint96(currentExchangeRate), newExchangeRate, currentTime);
    }

    /**
     * @notice Claim pending fees.
     * @dev This function must be called by the BoringVault.
     * @dev This function will lose precision if the exchange rate
     *      decimals is greater than the feeAsset's decimals.
     */
    function claimFees(ERC20 feeAsset) external {
        if (msg.sender != address(vault)) revert AccountantWithRateProviders__OnlyCallableByBoringVault();

        AccountantState storage state = accountantState;
        if (state.isPaused) revert AccountantWithRateProviders__Paused();
        if (state.feesOwedInBase == 0) revert AccountantWithRateProviders__ZeroFeesOwed();

        // Determine amount of fees owed in feeAsset.
        uint256 feesOwedInFeeAsset;
        RateProviderData memory data = rateProviderData[feeAsset];
        if (address(feeAsset) == address(base)) {
            feesOwedInFeeAsset = state.feesOwedInBase;
        } else {
            uint8 feeAssetDecimals = ERC20(feeAsset).decimals();
            uint256 feesOwedInBaseUsingFeeAssetDecimals =
                _changeDecimals(state.feesOwedInBase, decimals, feeAssetDecimals);
            if (data.isPeggedToBase) {
                feesOwedInFeeAsset = feesOwedInBaseUsingFeeAssetDecimals;
            } else {
                uint256 rate = data.rateProvider.getRate();
                feesOwedInFeeAsset = feesOwedInBaseUsingFeeAssetDecimals.mulDivDown(10 ** feeAssetDecimals, rate);
            }
        }
        // Zero out fees owed.
        state.feesOwedInBase = 0;
        // Transfer fee asset to payout address.
        feeAsset.safeTransferFrom(msg.sender, state.payoutAddress, feesOwedInFeeAsset);

        emit FeesClaimed(address(feeAsset), feesOwedInFeeAsset);
    }

    // ========================================= VIEW FUNCTIONS =========================================

    /**
     * @notice Get this BoringVault's current rate in the base.
     */
    function getRate() public view returns (uint256 rate) {
        rate = accountantState.exchangeRate;
    }

    /**
     * @notice Get this BoringVault's current rate in the base.
     * @dev Revert if paused.
     */
    function getRateSafe() external view returns (uint256 rate) {
        if (accountantState.isPaused) revert AccountantWithRateProviders__Paused();
        rate = getRate();
    }

    /**
     * @notice Get this BoringVault's current rate in the provided quote.
     * @dev `quote` must have its RateProviderData set, else this will revert.
     * @dev This function will lose precision if the exchange rate
     *      decimals is greater than the quote's decimals.
     */
    function getRateInQuote(ERC20 quote) public view returns (uint256 rateInQuote) {
        if (address(quote) == address(base)) {
            rateInQuote = accountantState.exchangeRate;
        } else {
            RateProviderData memory data = rateProviderData[quote];
            uint8 quoteDecimals = ERC20(quote).decimals();
            uint256 exchangeRateInQuoteDecimals = _changeDecimals(accountantState.exchangeRate, decimals, quoteDecimals);
            if (data.isPeggedToBase) {
                rateInQuote = exchangeRateInQuoteDecimals;
            } else {
                uint256 quoteRate = data.rateProvider.getRate();
                uint256 oneQuote = 10 ** quoteDecimals;
                rateInQuote = oneQuote.mulDivDown(exchangeRateInQuoteDecimals, quoteRate);
            }
        }
    }

    /**
     * @notice Get this BoringVault's current rate in the provided quote.
     * @dev `quote` must have its RateProviderData set, else this will revert.
     * @dev Revert if paused.
     */
    function getRateInQuoteSafe(ERC20 quote) external view returns (uint256 rateInQuote) {
        if (accountantState.isPaused) revert AccountantWithRateProviders__Paused();
        rateInQuote = getRateInQuote(quote);
    }

    /**
     * @notice Preview the result of an update to the exchange rate.
     * @return updateWillPause Whether the update will pause the contract.
     * @return newFeesOwedInBase The new fees owed in base.
     * @return totalFeesOwedInBase The total fees owed in base.
     */
    function previewUpdateExchangeRate(uint96 newExchangeRate)
        external
        view
        virtual
        returns (bool updateWillPause, uint256 newFeesOwedInBase, uint256 totalFeesOwedInBase)
    {
        (
            bool shouldPause,
            AccountantState storage state,
            uint64 currentTime,
            uint256 currentExchangeRate,
            uint256 currentTotalShares
        ) = _beforeUpdateExchangeRate(newExchangeRate);
        updateWillPause = shouldPause;
        totalFeesOwedInBase = state.feesOwedInBase;
        if (!shouldPause) {
            (uint256 platformFeesOwedInBase, uint256 shareSupplyToUse) = _calculatePlatformFee(
                state.totalSharesLastUpdate,
                state.lastUpdateTimestamp,
                state.platformFee,
                newExchangeRate,
                currentExchangeRate,
                currentTotalShares,
                currentTime
            );

            uint256 performanceFeesOwedInBase;
            if (newExchangeRate > state.highwaterMark) {
                (performanceFeesOwedInBase,) = _calculatePerformanceFee(
                    newExchangeRate, shareSupplyToUse, state.highwaterMark, state.performanceFee
                );
            }
            newFeesOwedInBase = platformFeesOwedInBase + performanceFeesOwedInBase;
            totalFeesOwedInBase += newFeesOwedInBase;
        }
    }

    // ========================================= INTERNAL HELPER FUNCTIONS =========================================
    /**
     * @notice Used to change the decimals of precision used for an amount.
     */
    function _changeDecimals(uint256 amount, uint8 fromDecimals, uint8 toDecimals) internal pure returns (uint256) {
        if (fromDecimals == toDecimals) {
            return amount;
        } else if (fromDecimals < toDecimals) {
            return amount * 10 ** (toDecimals - fromDecimals);
        } else {
            return amount / 10 ** (fromDecimals - toDecimals);
        }
    }

    /**
     * @notice Check if the new exchange rate is outside of the allowed bounds or if not enough time has passed.
     */
    function _beforeUpdateExchangeRate(uint96 newExchangeRate)
        internal
        view
        returns (
            bool shouldPause,
            AccountantState storage state,
            uint64 currentTime,
            uint256 currentExchangeRate,
            uint256 currentTotalShares
        )
    {
        state = accountantState;
        if (state.isPaused) revert AccountantWithRateProviders__Paused();
        currentTime = uint64(block.timestamp);
        currentExchangeRate = state.exchangeRate;
        currentTotalShares = vault.totalSupply();
        shouldPause = currentTime < state.lastUpdateTimestamp + state.minimumUpdateDelayInSeconds
            || newExchangeRate > currentExchangeRate.mulDivDown(state.allowedExchangeRateChangeUpper, 1e4)
            || newExchangeRate < currentExchangeRate.mulDivDown(state.allowedExchangeRateChangeLower, 1e4);
    }

    /**
     * @notice Set the exchange rate.
     */
    function _setExchangeRate(uint96 newExchangeRate, AccountantState storage state)
        internal
        virtual
        returns (uint96)
    {
        state.exchangeRate = newExchangeRate;
        return newExchangeRate;
    }

    /**
     * @notice Calculate platform fees.
     */
    function _calculatePlatformFee(
        uint128 totalSharesLastUpdate,
        uint64 lastUpdateTimestamp,
        uint16 platformFee,
        uint96 newExchangeRate,
        uint256 currentExchangeRate,
        uint256 currentTotalShares,
        uint64 currentTime
    ) internal view returns (uint256 platformFeesOwedInBase, uint256 shareSupplyToUse) {
        shareSupplyToUse = currentTotalShares;
        // Use the minimum between current total supply and total supply for last update.
        if (totalSharesLastUpdate < shareSupplyToUse) {
            shareSupplyToUse = totalSharesLastUpdate;
        }

        // Determine platform fees owned.
        if (platformFee > 0) {
            uint256 timeDelta = currentTime - lastUpdateTimestamp;
            uint256 minimumAssets = newExchangeRate > currentExchangeRate
                ? shareSupplyToUse.mulDivDown(currentExchangeRate, ONE_SHARE)
                : shareSupplyToUse.mulDivDown(newExchangeRate, ONE_SHARE);
            uint256 platformFeesAnnual = minimumAssets.mulDivDown(platformFee, 1e4);
            platformFeesOwedInBase = platformFeesAnnual.mulDivDown(timeDelta, 365 days);
        }
    }

    /**
     * @notice Calculate performance fees.
     */
    function _calculatePerformanceFee(
        uint96 newExchangeRate,
        uint256 shareSupplyToUse,
        uint96 datum,
        uint16 performanceFee
    ) internal view returns (uint256 performanceFeesOwedInBase, uint256 yieldEarned) {
        uint256 changeInExchangeRate = newExchangeRate - datum;
        yieldEarned = changeInExchangeRate.mulDivDown(shareSupplyToUse, ONE_SHARE);
        if (performanceFee > 0) {
            performanceFeesOwedInBase = yieldEarned.mulDivDown(performanceFee, 1e4);
        }
    }

    /**
     * @notice Calculate fees owed in base.
     * @dev This function will update the highwater mark if the new exchange rate is higher.
     */
    function _calculateFeesOwed(
        AccountantState storage state,
        uint96 newExchangeRate,
        uint256 currentExchangeRate,
        uint256 currentTotalShares,
        uint64 currentTime
    ) internal virtual {
        // Only update fees if we are not paused.
        // Update fee accounting.
        (uint256 newFeesOwedInBase, uint256 shareSupplyToUse) = _calculatePlatformFee(
            state.totalSharesLastUpdate,
            state.lastUpdateTimestamp,
            state.platformFee,
            newExchangeRate,
            currentExchangeRate,
            currentTotalShares,
            currentTime
        );

        // Account for performance fees.
        if (newExchangeRate > state.highwaterMark) {
            (uint256 performanceFeesOwedInBase,) =
                _calculatePerformanceFee(newExchangeRate, shareSupplyToUse, state.highwaterMark, state.performanceFee);

            // Add performance fees to fees owed.
            newFeesOwedInBase += performanceFeesOwedInBase;

            // Always update the highwater mark if the new exchange rate is higher.
            // This way if we are not iniitiall taking performance fees, we can start taking them
            // without back charging them on past performance.
            state.highwaterMark = newExchangeRate;
        }

        state.feesOwedInBase += uint128(newFeesOwedInBase);
    }
}

// SPDX-License-Identifier: AGPL-3.0-only
pragma solidity >=0.8.0;

/// @notice Arithmetic library with operations for fixed-point numbers.
/// @author Solmate (https://github.com/transmissions11/solmate/blob/main/src/utils/FixedPointMathLib.sol)
/// @author Inspired by USM (https://github.com/usmfum/USM/blob/master/contracts/WadMath.sol)
library FixedPointMathLib {
    /*//////////////////////////////////////////////////////////////
                    SIMPLIFIED FIXED POINT OPERATIONS
    //////////////////////////////////////////////////////////////*/

    uint256 internal constant MAX_UINT256 = 2**256 - 1;

    uint256 internal constant WAD = 1e18; // The scalar of ETH and most ERC20s.

    function mulWadDown(uint256 x, uint256 y) internal pure returns (uint256) {
        return mulDivDown(x, y, WAD); // Equivalent to (x * y) / WAD rounded down.
    }

    function mulWadUp(uint256 x, uint256 y) internal pure returns (uint256) {
        return mulDivUp(x, y, WAD); // Equivalent to (x * y) / WAD rounded up.
    }

    function divWadDown(uint256 x, uint256 y) internal pure returns (uint256) {
        return mulDivDown(x, WAD, y); // Equivalent to (x * WAD) / y rounded down.
    }

    function divWadUp(uint256 x, uint256 y) internal pure returns (uint256) {
        return mulDivUp(x, WAD, y); // Equivalent to (x * WAD) / y rounded up.
    }

    /*//////////////////////////////////////////////////////////////
                    LOW LEVEL FIXED POINT OPERATIONS
    //////////////////////////////////////////////////////////////*/

    function mulDivDown(
        uint256 x,
        uint256 y,
        uint256 denominator
    ) internal pure returns (uint256 z) {
        /// @solidity memory-safe-assembly
        assembly {
            // Equivalent to require(denominator != 0 && (y == 0 || x <= type(uint256).max / y))
            if iszero(mul(denominator, iszero(mul(y, gt(x, div(MAX_UINT256, y)))))) {
                revert(0, 0)
            }

            // Divide x * y by the denominator.
            z := div(mul(x, y), denominator)
        }
    }

    function mulDivUp(
        uint256 x,
        uint256 y,
        uint256 denominator
    ) internal pure returns (uint256 z) {
        /// @solidity memory-safe-assembly
        assembly {
            // Equivalent to require(denominator != 0 && (y == 0 || x <= type(uint256).max / y))
            if iszero(mul(denominator, iszero(mul(y, gt(x, div(MAX_UINT256, y)))))) {
                revert(0, 0)
            }

            // If x * y modulo the denominator is strictly greater than 0,
            // 1 is added to round up the division of x * y by the denominator.
            z := add(gt(mod(mul(x, y), denominator), 0), div(mul(x, y), denominator))
        }
    }

    function rpow(
        uint256 x,
        uint256 n,
        uint256 scalar
    ) internal pure returns (uint256 z) {
        /// @solidity memory-safe-assembly
        assembly {
            switch x
            case 0 {
                switch n
                case 0 {
                    // 0 ** 0 = 1
                    z := scalar
                }
                default {
                    // 0 ** n = 0
                    z := 0
                }
            }
            default {
                switch mod(n, 2)
                case 0 {
                    // If n is even, store scalar in z for now.
                    z := scalar
                }
                default {
                    // If n is odd, store x in z for now.
                    z := x
                }

                // Shifting right by 1 is like dividing by 2.
                let half := shr(1, scalar)

                for {
                    // Shift n right by 1 before looping to halve it.
                    n := shr(1, n)
                } n {
                    // Shift n right by 1 each iteration to halve it.
                    n := shr(1, n)
                } {
                    // Revert immediately if x ** 2 would overflow.
                    // Equivalent to iszero(eq(div(xx, x), x)) here.
                    if shr(128, x) {
                        revert(0, 0)
                    }

                    // Store x squared.
                    let xx := mul(x, x)

                    // Round to the nearest number.
                    let xxRound := add(xx, half)

                    // Revert if xx + half overflowed.
                    if lt(xxRound, xx) {
                        revert(0, 0)
                    }

                    // Set x to scaled xxRound.
                    x := div(xxRound, scalar)

                    // If n is even:
                    if mod(n, 2) {
                        // Compute z * x.
                        let zx := mul(z, x)

                        // If z * x overflowed:
                        if iszero(eq(div(zx, x), z)) {
                            // Revert if x is non-zero.
                            if iszero(iszero(x)) {
                                revert(0, 0)
                            }
                        }

                        // Round to the nearest number.
                        let zxRound := add(zx, half)

                        // Revert if zx + half overflowed.
                        if lt(zxRound, zx) {
                            revert(0, 0)
                        }

                        // Return properly scaled zxRound.
                        z := div(zxRound, scalar)
                    }
                }
            }
        }
    }

    /*//////////////////////////////////////////////////////////////
                        GENERAL NUMBER UTILITIES
    //////////////////////////////////////////////////////////////*/

    function sqrt(uint256 x) internal pure returns (uint256 z) {
        /// @solidity memory-safe-assembly
        assembly {
            let y := x // We start y at x, which will help us make our initial estimate.

            z := 181 // The "correct" value is 1, but this saves a multiplication later.

            // This segment is to get a reasonable initial estimate for the Babylonian method. With a bad
            // start, the correct # of bits increases ~linearly each iteration instead of ~quadratically.

            // We check y >= 2^(k + 8) but shift right by k bits
            // each branch to ensure that if x >= 256, then y >= 256.
            if iszero(lt(y, 0x10000000000000000000000000000000000)) {
                y := shr(128, y)
                z := shl(64, z)
            }
            if iszero(lt(y, 0x1000000000000000000)) {
                y := shr(64, y)
                z := shl(32, z)
            }
            if iszero(lt(y, 0x10000000000)) {
                y := shr(32, y)
                z := shl(16, z)
            }
            if iszero(lt(y, 0x1000000)) {
                y := shr(16, y)
                z := shl(8, z)
            }

            // Goal was to get z*z*y within a small factor of x. More iterations could
            // get y in a tighter range. Currently, we will have y in [256, 256*2^16).
            // We ensured y >= 256 so that the relative difference between y and y+1 is small.
            // That's not possible if x < 256 but we can just verify those cases exhaustively.

            // Now, z*z*y <= x < z*z*(y+1), and y <= 2^(16+8), and either y >= 256, or x < 256.
            // Correctness can be checked exhaustively for x < 256, so we assume y >= 256.
            // Then z*sqrt(y) is within sqrt(257)/sqrt(256) of sqrt(x), or about 20bps.

            // For s in the range [1/256, 256], the estimate f(s) = (181/1024) * (s+1) is in the range
            // (1/2.84 * sqrt(s), 2.84 * sqrt(s)), with largest error when s = 1 and when s = 256 or 1/256.

            // Since y is in [256, 256*2^16), let a = y/65536, so that a is in [1/256, 256). Then we can estimate
            // sqrt(y) using sqrt(65536) * 181/1024 * (a + 1) = 181/4 * (y + 65536)/65536 = 181 * (y + 65536)/2^18.

            // There is no overflow risk here since y < 2^136 after the first branch above.
            z := shr(18, mul(z, add(y, 65536))) // A mul() is saved from starting z at 181.

            // Given the worst case multiplicative error of 2.84 above, 7 iterations should be enough.
            z := shr(1, add(z, div(x, z)))
            z := shr(1, add(z, div(x, z)))
            z := shr(1, add(z, div(x, z)))
            z := shr(1, add(z, div(x, z)))
            z := shr(1, add(z, div(x, z)))
            z := shr(1, add(z, div(x, z)))
            z := shr(1, add(z, div(x, z)))

            // If x+1 is a perfect square, the Babylonian method cycles between
            // floor(sqrt(x)) and ceil(sqrt(x)). This statement ensures we return floor.
            // See: https://en.wikipedia.org/wiki/Integer_square_root#Using_only_integer_division
            // Since the ceil is rare, we save gas on the assignment and repeat division in the rare case.
            // If you don't care whether the floor or ceil square root is returned, you can remove this statement.
            z := sub(z, lt(div(x, z), z))
        }
    }

    function unsafeMod(uint256 x, uint256 y) internal pure returns (uint256 z) {
        /// @solidity memory-safe-assembly
        assembly {
            // Mod x by y. Note this will return
            // 0 instead of reverting if y is zero.
            z := mod(x, y)
        }
    }

    function unsafeDiv(uint256 x, uint256 y) internal pure returns (uint256 r) {
        /// @solidity memory-safe-assembly
        assembly {
            // Divide x by y. Note this will return
            // 0 instead of reverting if y is zero.
            r := div(x, y)
        }
    }

    function unsafeDivUp(uint256 x, uint256 y) internal pure returns (uint256 z) {
        /// @solidity memory-safe-assembly
        assembly {
            // Add 1 to x * y if x % y > 0. Note this will
            // return 0 instead of reverting if y is zero.
            z := add(gt(mod(x, y), 0), div(x, y))
        }
    }
}

// SPDX-License-Identifier: AGPL-3.0-only
pragma solidity >=0.8.0;

import {ERC20} from "../tokens/ERC20.sol";

/// @notice Safe ETH and ERC20 transfer library that gracefully handles missing return values.
/// @author Solmate (https://github.com/transmissions11/solmate/blob/main/src/utils/SafeTransferLib.sol)
/// @dev Use with caution! Some functions in this library knowingly create dirty bits at the destination of the free memory pointer.
/// @dev Note that none of the functions in this library check that a token has code at all! That responsibility is delegated to the caller.
library SafeTransferLib {
    /*//////////////////////////////////////////////////////////////
                             ETH OPERATIONS
    //////////////////////////////////////////////////////////////*/

    function safeTransferETH(address to, uint256 amount) internal {
        bool success;

        /// @solidity memory-safe-assembly
        assembly {
            // Transfer the ETH and store if it succeeded or not.
            success := call(gas(), to, amount, 0, 0, 0, 0)
        }

        require(success, "ETH_TRANSFER_FAILED");
    }

    /*//////////////////////////////////////////////////////////////
                            ERC20 OPERATIONS
    //////////////////////////////////////////////////////////////*/

    function safeTransferFrom(
        ERC20 token,
        address from,
        address to,
        uint256 amount
    ) internal {
        bool success;

        /// @solidity memory-safe-assembly
        assembly {
            // Get a pointer to some free memory.
            let freeMemoryPointer := mload(0x40)

            // Write the abi-encoded calldata into memory, beginning with the function selector.
            mstore(freeMemoryPointer, 0x23b872dd00000000000000000000000000000000000000000000000000000000)
            mstore(add(freeMemoryPointer, 4), and(from, 0xffffffffffffffffffffffffffffffffffffffff)) // Append and mask the "from" argument.
            mstore(add(freeMemoryPointer, 36), and(to, 0xffffffffffffffffffffffffffffffffffffffff)) // Append and mask the "to" argument.
            mstore(add(freeMemoryPointer, 68), amount) // Append the "amount" argument. Masking not required as it's a full 32 byte type.

            success := and(
                // Set success to whether the call reverted, if not we check it either
                // returned exactly 1 (can't just be non-zero data), or had no return data.
                or(and(eq(mload(0), 1), gt(returndatasize(), 31)), iszero(returndatasize())),
                // We use 100 because the length of our calldata totals up like so: 4 + 32 * 3.
                // We use 0 and 32 to copy up to 32 bytes of return data into the scratch space.
                // Counterintuitively, this call must be positioned second to the or() call in the
                // surrounding and() call or else returndatasize() will be zero during the computation.
                call(gas(), token, 0, freeMemoryPointer, 100, 0, 32)
            )
        }

        require(success, "TRANSFER_FROM_FAILED");
    }

    function safeTransfer(
        ERC20 token,
        address to,
        uint256 amount
    ) internal {
        bool success;

        /// @solidity memory-safe-assembly
        assembly {
            // Get a pointer to some free memory.
            let freeMemoryPointer := mload(0x40)

            // Write the abi-encoded calldata into memory, beginning with the function selector.
            mstore(freeMemoryPointer, 0xa9059cbb00000000000000000000000000000000000000000000000000000000)
            mstore(add(freeMemoryPointer, 4), and(to, 0xffffffffffffffffffffffffffffffffffffffff)) // Append and mask the "to" argument.
            mstore(add(freeMemoryPointer, 36), amount) // Append the "amount" argument. Masking not required as it's a full 32 byte type.

            success := and(
                // Set success to whether the call reverted, if not we check it either
                // returned exactly 1 (can't just be non-zero data), or had no return data.
                or(and(eq(mload(0), 1), gt(returndatasize(), 31)), iszero(returndatasize())),
                // We use 68 because the length of our calldata totals up like so: 4 + 32 * 2.
                // We use 0 and 32 to copy up to 32 bytes of return data into the scratch space.
                // Counterintuitively, this call must be positioned second to the or() call in the
                // surrounding and() call or else returndatasize() will be zero during the computation.
                call(gas(), token, 0, freeMemoryPointer, 68, 0, 32)
            )
        }

        require(success, "TRANSFER_FAILED");
    }

    function safeApprove(
        ERC20 token,
        address to,
        uint256 amount
    ) internal {
        bool success;

        /// @solidity memory-safe-assembly
        assembly {
            // Get a pointer to some free memory.
            let freeMemoryPointer := mload(0x40)

            // Write the abi-encoded calldata into memory, beginning with the function selector.
            mstore(freeMemoryPointer, 0x095ea7b300000000000000000000000000000000000000000000000000000000)
            mstore(add(freeMemoryPointer, 4), and(to, 0xffffffffffffffffffffffffffffffffffffffff)) // Append and mask the "to" argument.
            mstore(add(freeMemoryPointer, 36), amount) // Append the "amount" argument. Masking not required as it's a full 32 byte type.

            success := and(
                // Set success to whether the call reverted, if not we check it either
                // returned exactly 1 (can't just be non-zero data), or had no return data.
                or(and(eq(mload(0), 1), gt(returndatasize(), 31)), iszero(returndatasize())),
                // We use 68 because the length of our calldata totals up like so: 4 + 32 * 2.
                // We use 0 and 32 to copy up to 32 bytes of return data into the scratch space.
                // Counterintuitively, this call must be positioned second to the or() call in the
                // surrounding and() call or else returndatasize() will be zero during the computation.
                call(gas(), token, 0, freeMemoryPointer, 68, 0, 32)
            )
        }

        require(success, "APPROVE_FAILED");
    }
}

// SPDX-License-Identifier: SEL-1.0
// Copyright © 2025 Veda Tech Labs
// Derived from Boring Vault Software © 2025 Veda Tech Labs (TEST ONLY – NO COMMERCIAL USE)
// Licensed under Software Evaluation License, Version 1.0
pragma solidity 0.8.21;

interface BeforeTransferHook {
    function beforeTransfer(address from, address to, address operator) external view;
}

// SPDX-License-Identifier: AGPL-3.0-only
pragma solidity >=0.8.0;

/// @notice Provides a flexible and updatable auth pattern which is completely separate from application logic.
/// @author Solmate (https://github.com/transmissions11/solmate/blob/main/src/auth/Auth.sol)
/// @author Modified from Dappsys (https://github.com/dapphub/ds-auth/blob/master/src/auth.sol)
abstract contract Auth {
    event OwnershipTransferred(address indexed user, address indexed newOwner);

    event AuthorityUpdated(address indexed user, Authority indexed newAuthority);

    address public owner;

    Authority public authority;

    constructor(address _owner, Authority _authority) {
        owner = _owner;
        authority = _authority;

        emit OwnershipTransferred(msg.sender, _owner);
        emit AuthorityUpdated(msg.sender, _authority);
    }

    modifier requiresAuth() virtual {
        require(isAuthorized(msg.sender, msg.sig), "UNAUTHORIZED");

        _;
    }

    function isAuthorized(address user, bytes4 functionSig) internal view virtual returns (bool) {
        Authority auth = authority; // Memoizing authority saves us a warm SLOAD, around 100 gas.

        // Checking if the caller is the owner only after calling the authority saves gas in most cases, but be
        // aware that this makes protected functions uncallable even to the owner if the authority is out of order.
        return (address(auth) != address(0) && auth.canCall(user, address(this), functionSig)) || user == owner;
    }

    function setAuthority(Authority newAuthority) public virtual {
        // We check if the caller is the owner first because we want to ensure they can
        // always swap out the authority even if it's reverting or using up a lot of gas.
        require(msg.sender == owner || authority.canCall(msg.sender, address(this), msg.sig));

        authority = newAuthority;

        emit AuthorityUpdated(msg.sender, newAuthority);
    }

    function transferOwnership(address newOwner) public virtual requiresAuth {
        owner = newOwner;

        emit OwnershipTransferred(msg.sender, newOwner);
    }
}

/// @notice A generic interface for a contract which provides authorization data to an Auth instance.
/// @author Solmate (https://github.com/transmissions11/solmate/blob/main/src/auth/Auth.sol)
/// @author Modified from Dappsys (https://github.com/dapphub/ds-auth/blob/master/src/auth.sol)
interface Authority {
    function canCall(
        address user,
        address target,
        bytes4 functionSig
    ) external view returns (bool);
}

// SPDX-License-Identifier: AGPL-3.0-only
pragma solidity >=0.8.0;

/// @notice Gas optimized reentrancy protection for smart contracts.
/// @author Solmate (https://github.com/transmissions11/solmate/blob/main/src/utils/ReentrancyGuard.sol)
/// @author Modified from OpenZeppelin (https://github.com/OpenZeppelin/openzeppelin-contracts/blob/master/contracts/security/ReentrancyGuard.sol)
abstract contract ReentrancyGuard {
    uint256 private locked = 1;

    modifier nonReentrant() virtual {
        require(locked == 1, "REENTRANCY");

        locked = 2;

        _;

        locked = 1;
    }
}

// SPDX-License-Identifier: SEL-1.0
// Copyright © 2025 Veda Tech Labs
// Derived from Boring Vault Software © 2025 Veda Tech Labs (TEST ONLY – NO COMMERCIAL USE)
// Licensed under Software Evaluation License, Version 1.0
pragma solidity 0.8.21;

interface IPausable {
    function pause() external;
    function unpause() external;
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/structs/EnumerableSet.sol)
// This file was procedurally generated from scripts/generate/templates/EnumerableSet.js.

pragma solidity ^0.8.20;

/**
 * @dev Library for managing
 * https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive
 * types.
 *
 * Sets have the following properties:
 *
 * - Elements are added, removed, and checked for existence in constant time
 * (O(1)).
 * - Elements are enumerated in O(n). No guarantees are made on the ordering.
 *
 * ```solidity
 * contract Example {
 *     // Add the library methods
 *     using EnumerableSet for EnumerableSet.AddressSet;
 *
 *     // Declare a set state variable
 *     EnumerableSet.AddressSet private mySet;
 * }
 * ```
 *
 * As of v3.3.0, sets of type `bytes32` (`Bytes32Set`), `address` (`AddressSet`)
 * and `uint256` (`UintSet`) are supported.
 *
 * [WARNING]
 * ====
 * Trying to delete such a structure from storage will likely result in data corruption, rendering the structure
 * unusable.
 * See https://github.com/ethereum/solidity/pull/11843[ethereum/solidity#11843] for more info.
 *
 * In order to clean an EnumerableSet, you can either remove all elements one by one or create a fresh instance using an
 * array of EnumerableSet.
 * ====
 */
library EnumerableSet {
    // To implement this library for multiple types with as little code
    // repetition as possible, we write it in terms of a generic Set type with
    // bytes32 values.
    // The Set implementation uses private functions, and user-facing
    // implementations (such as AddressSet) are just wrappers around the
    // underlying Set.
    // This means that we can only create new EnumerableSets for types that fit
    // in bytes32.

    struct Set {
        // Storage of set values
        bytes32[] _values;
        // Position is the index of the value in the `values` array plus 1.
        // Position 0 is used to mean a value is not in the set.
        mapping(bytes32 value => uint256) _positions;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function _add(Set storage set, bytes32 value) private returns (bool) {
        if (!_contains(set, value)) {
            set._values.push(value);
            // The value is stored at length-1, but we add 1 to all indexes
            // and use 0 as a sentinel value
            set._positions[value] = set._values.length;
            return true;
        } else {
            return false;
        }
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function _remove(Set storage set, bytes32 value) private returns (bool) {
        // We cache the value's position to prevent multiple reads from the same storage slot
        uint256 position = set._positions[value];

        if (position != 0) {
            // Equivalent to contains(set, value)
            // To delete an element from the _values array in O(1), we swap the element to delete with the last one in
            // the array, and then remove the last element (sometimes called as 'swap and pop').
            // This modifies the order of the array, as noted in {at}.

            uint256 valueIndex = position - 1;
            uint256 lastIndex = set._values.length - 1;

            if (valueIndex != lastIndex) {
                bytes32 lastValue = set._values[lastIndex];

                // Move the lastValue to the index where the value to delete is
                set._values[valueIndex] = lastValue;
                // Update the tracked position of the lastValue (that was just moved)
                set._positions[lastValue] = position;
            }

            // Delete the slot where the moved value was stored
            set._values.pop();

            // Delete the tracked position for the deleted slot
            delete set._positions[value];

            return true;
        } else {
            return false;
        }
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function _contains(Set storage set, bytes32 value) private view returns (bool) {
        return set._positions[value] != 0;
    }

    /**
     * @dev Returns the number of values on the set. O(1).
     */
    function _length(Set storage set) private view returns (uint256) {
        return set._values.length;
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function _at(Set storage set, uint256 index) private view returns (bytes32) {
        return set._values[index];
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function _values(Set storage set) private view returns (bytes32[] memory) {
        return set._values;
    }

    // Bytes32Set

    struct Bytes32Set {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(Bytes32Set storage set, bytes32 value) internal returns (bool) {
        return _add(set._inner, value);
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(Bytes32Set storage set, bytes32 value) internal returns (bool) {
        return _remove(set._inner, value);
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(Bytes32Set storage set, bytes32 value) internal view returns (bool) {
        return _contains(set._inner, value);
    }

    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(Bytes32Set storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(Bytes32Set storage set, uint256 index) internal view returns (bytes32) {
        return _at(set._inner, index);
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(Bytes32Set storage set) internal view returns (bytes32[] memory) {
        bytes32[] memory store = _values(set._inner);
        bytes32[] memory result;

        /// @solidity memory-safe-assembly
        assembly {
            result := store
        }

        return result;
    }

    // AddressSet

    struct AddressSet {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(AddressSet storage set, address value) internal returns (bool) {
        return _add(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(AddressSet storage set, address value) internal returns (bool) {
        return _remove(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(AddressSet storage set, address value) internal view returns (bool) {
        return _contains(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(AddressSet storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(AddressSet storage set, uint256 index) internal view returns (address) {
        return address(uint160(uint256(_at(set._inner, index))));
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(AddressSet storage set) internal view returns (address[] memory) {
        bytes32[] memory store = _values(set._inner);
        address[] memory result;

        /// @solidity memory-safe-assembly
        assembly {
            result := store
        }

        return result;
    }

    // UintSet

    struct UintSet {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(UintSet storage set, uint256 value) internal returns (bool) {
        return _add(set._inner, bytes32(value));
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(UintSet storage set, uint256 value) internal returns (bool) {
        return _remove(set._inner, bytes32(value));
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(UintSet storage set, uint256 value) internal view returns (bool) {
        return _contains(set._inner, bytes32(value));
    }

    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(UintSet storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(UintSet storage set, uint256 index) internal view returns (uint256) {
        return uint256(_at(set._inner, index));
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(UintSet storage set) internal view returns (uint256[] memory) {
        bytes32[] memory store = _values(set._inner);
        uint256[] memory result;

        /// @solidity memory-safe-assembly
        assembly {
            result := store
        }

        return result;
    }
}

// SPDX-License-Identifier: SEL-1.0
// Copyright © 2025 Veda Tech Labs
// Derived from Boring Vault Software © 2025 Veda Tech Labs (TEST ONLY – NO COMMERCIAL USE)
// Licensed under Software Evaluation License, Version 1.0
pragma solidity 0.8.21;

interface IBoringSolver {
    function boringSolve(
        address initiator,
        address boringVault,
        address solveAsset,
        uint256 totalShares,
        uint256 requiredAssets,
        bytes calldata solveData
    ) external;
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/Address.sol)

pragma solidity ^0.8.20;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev The ETH balance of the account is not enough to perform the operation.
     */
    error AddressInsufficientBalance(address account);

    /**
     * @dev There's no code at `target` (it is not a contract).
     */
    error AddressEmptyCode(address target);

    /**
     * @dev A call to an address target failed. The target may have reverted.
     */
    error FailedInnerCall();

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.8.20/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        if (address(this).balance < amount) {
            revert AddressInsufficientBalance(address(this));
        }

        (bool success, ) = recipient.call{value: amount}("");
        if (!success) {
            revert FailedInnerCall();
        }
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason or custom error, it is bubbled
     * up by this function (like regular Solidity function calls). However, if
     * the call reverted with no returned reason, this function reverts with a
     * {FailedInnerCall} error.
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        if (address(this).balance < value) {
            revert AddressInsufficientBalance(address(this));
        }
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and reverts if the target
     * was not a contract or bubbling up the revert reason (falling back to {FailedInnerCall}) in case of an
     * unsuccessful call.
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata
    ) internal view returns (bytes memory) {
        if (!success) {
            _revert(returndata);
        } else {
            // only check if target is a contract if the call was successful and the return data is empty
            // otherwise we already know that it was a contract
            if (returndata.length == 0 && target.code.length == 0) {
                revert AddressEmptyCode(target);
            }
            return returndata;
        }
    }

    /**
     * @dev Tool to verify that a low level call was successful, and reverts if it wasn't, either by bubbling the
     * revert reason or with a default {FailedInnerCall} error.
     */
    function verifyCallResult(bool success, bytes memory returndata) internal pure returns (bytes memory) {
        if (!success) {
            _revert(returndata);
        } else {
            return returndata;
        }
    }

    /**
     * @dev Reverts with returndata if present. Otherwise reverts with {FailedInnerCall}.
     */
    function _revert(bytes memory returndata) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert FailedInnerCall();
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/utils/ERC721Holder.sol)

pragma solidity ^0.8.20;

import {IERC721Receiver} from "../IERC721Receiver.sol";

/**
 * @dev Implementation of the {IERC721Receiver} interface.
 *
 * Accepts all token transfers.
 * Make sure the contract is able to use its token with {IERC721-safeTransferFrom}, {IERC721-approve} or
 * {IERC721-setApprovalForAll}.
 */
abstract contract ERC721Holder is IERC721Receiver {
    /**
     * @dev See {IERC721Receiver-onERC721Received}.
     *
     * Always returns `IERC721Receiver.onERC721Received.selector`.
     */
    function onERC721Received(address, address, uint256, bytes memory) public virtual returns (bytes4) {
        return this.onERC721Received.selector;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC1155/utils/ERC1155Holder.sol)

pragma solidity ^0.8.20;

import {IERC165, ERC165} from "../../../utils/introspection/ERC165.sol";
import {IERC1155Receiver} from "../IERC1155Receiver.sol";

/**
 * @dev Simple implementation of `IERC1155Receiver` that will allow a contract to hold ERC1155 tokens.
 *
 * IMPORTANT: When inheriting this contract, you must include a way to use the received tokens, otherwise they will be
 * stuck.
 */
abstract contract ERC1155Holder is ERC165, IERC1155Receiver {
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
        return interfaceId == type(IERC1155Receiver).interfaceId || super.supportsInterface(interfaceId);
    }

    function onERC1155Received(
        address,
        address,
        uint256,
        uint256,
        bytes memory
    ) public virtual override returns (bytes4) {
        return this.onERC1155Received.selector;
    }

    function onERC1155BatchReceived(
        address,
        address,
        uint256[] memory,
        uint256[] memory,
        bytes memory
    ) public virtual override returns (bytes4) {
        return this.onERC1155BatchReceived.selector;
    }
}

// SPDX-License-Identifier: SEL-1.0
// Copyright © 2025 Veda Tech Labs
// Derived from Boring Vault Software © 2025 Veda Tech Labs (TEST ONLY – NO COMMERCIAL USE)
// Licensed under Software Evaluation License, Version 1.0
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.

// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
// GNU General Public License for more details.

// You should have received a copy of the GNU General Public License
// along with this program.  If not, see <http://www.gnu.org/licenses/>.

pragma solidity ^0.8.0;

interface IRateProvider {
    function getRate() external view returns (uint256);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/IERC721Receiver.sol)

pragma solidity ^0.8.20;

/**
 * @title ERC721 token receiver interface
 * @dev Interface for any contract that wants to support safeTransfers
 * from ERC721 asset contracts.
 */
interface IERC721Receiver {
    /**
     * @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
     * by `operator` from `from`, this function is called.
     *
     * It must return its Solidity selector to confirm the token transfer.
     * If any other value is returned or the interface is not implemented by the recipient, the transfer will be
     * reverted.
     *
     * The selector can be obtained in Solidity with `IERC721Receiver.onERC721Received.selector`.
     */
    function onERC721Received(
        address operator,
        address from,
        uint256 tokenId,
        bytes calldata data
    ) external returns (bytes4);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/introspection/ERC165.sol)

pragma solidity ^0.8.20;

import {IERC165} from "./IERC165.sol";

/**
 * @dev Implementation of the {IERC165} interface.
 *
 * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
 * for the additional interface id that will be supported. For example:
 *
 * ```solidity
 * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
 *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
 * }
 * ```
 */
abstract contract ERC165 is IERC165 {
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual returns (bool) {
        return interfaceId == type(IERC165).interfaceId;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC1155/IERC1155Receiver.sol)

pragma solidity ^0.8.20;

import {IERC165} from "../../utils/introspection/IERC165.sol";

/**
 * @dev Interface that must be implemented by smart contracts in order to receive
 * ERC-1155 token transfers.
 */
interface IERC1155Receiver is IERC165 {
    /**
     * @dev Handles the receipt of a single ERC1155 token type. This function is
     * called at the end of a `safeTransferFrom` after the balance has been updated.
     *
     * NOTE: To accept the transfer, this must return
     * `bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))`
     * (i.e. 0xf23a6e61, or its own function selector).
     *
     * @param operator The address which initiated the transfer (i.e. msg.sender)
     * @param from The address which previously owned the token
     * @param id The ID of the token being transferred
     * @param value The amount of tokens being transferred
     * @param data Additional data with no specified format
     * @return `bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))` if transfer is allowed
     */
    function onERC1155Received(
        address operator,
        address from,
        uint256 id,
        uint256 value,
        bytes calldata data
    ) external returns (bytes4);

    /**
     * @dev Handles the receipt of a multiple ERC1155 token types. This function
     * is called at the end of a `safeBatchTransferFrom` after the balances have
     * been updated.
     *
     * NOTE: To accept the transfer(s), this must return
     * `bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))`
     * (i.e. 0xbc197c81, or its own function selector).
     *
     * @param operator The address which initiated the batch transfer (i.e. msg.sender)
     * @param from The address which previously owned the token
     * @param ids An array containing ids of each token being transferred (order and length must match values array)
     * @param values An array containing amounts of each token being transferred (order and length must match ids array)
     * @param data Additional data with no specified format
     * @return `bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))` if transfer is allowed
     */
    function onERC1155BatchReceived(
        address operator,
        address from,
        uint256[] calldata ids,
        uint256[] calldata values,
        bytes calldata data
    ) external returns (bytes4);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/introspection/IERC165.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}

{
  "remappings": [
    "@solmate/=lib/solmate/src/",
    "@forge-std/=lib/forge-std/src/",
    "@ds-test/=lib/forge-std/lib/ds-test/src/",
    "ds-test/=lib/forge-std/lib/ds-test/src/",
    "@openzeppelin/=lib/openzeppelin-contracts/",
    "@ccip/=lib/ccip/",
    "@oapp-auth/=lib/OAppAuth/src/",
    "@devtools-oapp-evm/=lib/OAppAuth/lib/devtools/packages/oapp-evm/contracts/oapp/",
    "@layerzerolabs/lz-evm-messagelib-v2/=lib/OAppAuth/node_modules/@layerzerolabs/lz-evm-messagelib-v2/",
    "@layerzerolabs/lz-evm-protocol-v2/=lib/OAppAuth/lib/LayerZero-V2/packages/layerzero-v2/evm/protocol/",
    "@layerzerolabs/oapp-evm/=lib/OAppAuth/lib/devtools/packages/oapp-evm/",
    "@lz-oapp-evm/=lib/OAppAuth/lib/LayerZero-V2/packages/layerzero-v2/evm/oapp/contracts/oapp/",
    "@sbu/=lib/OAppAuth/lib/solidity-bytes-utils/",
    "LayerZero-V2/=lib/OAppAuth/lib/",
    "OAppAuth/=lib/OAppAuth/",
    "ccip/=lib/ccip/contracts/",
    "erc4626-tests/=lib/openzeppelin-contracts/lib/erc4626-tests/",
    "forge-std/=lib/forge-std/src/",
    "halmos-cheatcodes/=lib/OAppAuth/lib/openzeppelin-contracts/lib/halmos-cheatcodes/src/",
    "openzeppelin-contracts/=lib/openzeppelin-contracts/",
    "solidity-bytes-utils/=lib/OAppAuth/node_modules/solidity-bytes-utils/",
    "solmate/=lib/solmate/src/"
  ],
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "metadata": {
    "useLiteralContent": false,
    "bytecodeHash": "ipfs",
    "appendCBOR": true
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  },
  "evmVersion": "shanghai",
  "viaIR": false
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[{"internalType":"address","name":"_owner","type":"address"},{"internalType":"address","name":"_auth","type":"address"},{"internalType":"address payable","name":"_boringVault","type":"address"},{"internalType":"address","name":"_accountant","type":"address"}],"stateMutability":"nonpayable","type":"constructor"},{"inputs":[],"name":"BoringOnChainQueue__BadDeadline","type":"error"},{"inputs":[],"name":"BoringOnChainQueue__BadDiscount","type":"error"},{"inputs":[],"name":"BoringOnChainQueue__BadInput","type":"error"},{"inputs":[],"name":"BoringOnChainQueue__BadShareAmount","type":"error"},{"inputs":[],"name":"BoringOnChainQueue__BadUser","type":"error"},{"inputs":[],"name":"BoringOnChainQueue__DeadlinePassed","type":"error"},{"inputs":[],"name":"BoringOnChainQueue__Keccak256Collision","type":"error"},{"inputs":[],"name":"BoringOnChainQueue__MAXIMUM_MINIMUM_SECONDS_TO_DEADLINE","type":"error"},{"inputs":[],"name":"BoringOnChainQueue__MAXIMUM_SECONDS_TO_MATURITY","type":"error"},{"inputs":[],"name":"BoringOnChainQueue__MAX_DISCOUNT","type":"error"},{"inputs":[],"name":"BoringOnChainQueue__NotEnoughWithdrawCapacity","type":"error"},{"inputs":[],"name":"BoringOnChainQueue__NotMatured","type":"error"},{"inputs":[],"name":"BoringOnChainQueue__Overflow","type":"error"},{"inputs":[],"name":"BoringOnChainQueue__Paused","type":"error"},{"inputs":[],"name":"BoringOnChainQueue__PermitFailedAndAllowanceTooLow","type":"error"},{"inputs":[],"name":"BoringOnChainQueue__RequestNotFound","type":"error"},{"inputs":[],"name":"BoringOnChainQueue__RescueCannotTakeSharesFromActiveRequests","type":"error"},{"inputs":[],"name":"BoringOnChainQueue__SolveAssetMismatch","type":"error"},{"inputs":[],"name":"BoringOnChainQueue__WithdrawsNotAllowedForAsset","type":"error"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"user","type":"address"},{"indexed":true,"internalType":"contract Authority","name":"newAuthority","type":"address"}],"name":"AuthorityUpdated","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"bytes32","name":"requestId","type":"bytes32"},{"indexed":true,"internalType":"address","name":"user","type":"address"},{"indexed":false,"internalType":"uint256","name":"timestamp","type":"uint256"}],"name":"OnChainWithdrawCancelled","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"bytes32","name":"requestId","type":"bytes32"},{"indexed":true,"internalType":"address","name":"user","type":"address"},{"indexed":true,"internalType":"address","name":"assetOut","type":"address"},{"indexed":false,"internalType":"uint96","name":"nonce","type":"uint96"},{"indexed":false,"internalType":"uint128","name":"amountOfShares","type":"uint128"},{"indexed":false,"internalType":"uint128","name":"amountOfAssets","type":"uint128"},{"indexed":false,"internalType":"uint40","name":"creationTime","type":"uint40"},{"indexed":false,"internalType":"uint24","name":"secondsToMaturity","type":"uint24"},{"indexed":false,"internalType":"uint24","name":"secondsToDeadline","type":"uint24"}],"name":"OnChainWithdrawRequested","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"bytes32","name":"requestId","type":"bytes32"},{"indexed":true,"internalType":"address","name":"user","type":"address"},{"indexed":false,"internalType":"uint256","name":"timestamp","type":"uint256"}],"name":"OnChainWithdrawSolved","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"user","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"anonymous":false,"inputs":[],"name":"Paused","type":"event"},{"anonymous":false,"inputs":[],"name":"Unpaused","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"assetOut","type":"address"}],"name":"WithdrawAssetStopped","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"assetOut","type":"address"},{"indexed":false,"internalType":"uint24","name":"secondsToMaturity","type":"uint24"},{"indexed":false,"internalType":"uint24","name":"minimumSecondsToDeadline","type":"uint24"},{"indexed":false,"internalType":"uint16","name":"minDiscount","type":"uint16"},{"indexed":false,"internalType":"uint16","name":"maxDiscount","type":"uint16"},{"indexed":false,"internalType":"uint96","name":"minimumShares","type":"uint96"}],"name":"WithdrawAssetUpdated","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"assetOut","type":"address"},{"indexed":false,"internalType":"uint256","name":"withdrawCapacity","type":"uint256"}],"name":"WithdrawCapacityUpdated","type":"event"},{"inputs":[],"name":"ONE_SHARE","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"accountant","outputs":[{"internalType":"contract AccountantWithRateProviders","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"authority","outputs":[{"internalType":"contract Authority","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"boringVault","outputs":[{"internalType":"contract BoringVault","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"components":[{"internalType":"uint96","name":"nonce","type":"uint96"},{"internalType":"address","name":"user","type":"address"},{"internalType":"address","name":"assetOut","type":"address"},{"internalType":"uint128","name":"amountOfShares","type":"uint128"},{"internalType":"uint128","name":"amountOfAssets","type":"uint128"},{"internalType":"uint40","name":"creationTime","type":"uint40"},{"internalType":"uint24","name":"secondsToMaturity","type":"uint24"},{"internalType":"uint24","name":"secondsToDeadline","type":"uint24"}],"internalType":"struct BoringOnChainQueue.OnChainWithdraw","name":"request","type":"tuple"}],"name":"cancelOnChainWithdraw","outputs":[{"internalType":"bytes32","name":"requestId","type":"bytes32"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"components":[{"internalType":"uint96","name":"nonce","type":"uint96"},{"internalType":"address","name":"user","type":"address"},{"internalType":"address","name":"assetOut","type":"address"},{"internalType":"uint128","name":"amountOfShares","type":"uint128"},{"internalType":"uint128","name":"amountOfAssets","type":"uint128"},{"internalType":"uint40","name":"creationTime","type":"uint40"},{"internalType":"uint24","name":"secondsToMaturity","type":"uint24"},{"internalType":"uint24","name":"secondsToDeadline","type":"uint24"}],"internalType":"struct BoringOnChainQueue.OnChainWithdraw[]","name":"requests","type":"tuple[]"}],"name":"cancelUserWithdraws","outputs":[{"internalType":"bytes32[]","name":"canceledRequestIds","type":"bytes32[]"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"components":[{"internalType":"uint96","name":"nonce","type":"uint96"},{"internalType":"address","name":"user","type":"address"},{"internalType":"address","name":"assetOut","type":"address"},{"internalType":"uint128","name":"amountOfShares","type":"uint128"},{"internalType":"uint128","name":"amountOfAssets","type":"uint128"},{"internalType":"uint40","name":"creationTime","type":"uint40"},{"internalType":"uint24","name":"secondsToMaturity","type":"uint24"},{"internalType":"uint24","name":"secondsToDeadline","type":"uint24"}],"internalType":"struct BoringOnChainQueue.OnChainWithdraw","name":"request","type":"tuple"}],"name":"getRequestId","outputs":[{"internalType":"bytes32","name":"requestId","type":"bytes32"}],"stateMutability":"pure","type":"function"},{"inputs":[],"name":"getRequestIds","outputs":[{"internalType":"bytes32[]","name":"","type":"bytes32[]"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"isPaused","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"nonce","outputs":[{"internalType":"uint96","name":"","type":"uint96"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"pause","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"assetOut","type":"address"},{"internalType":"uint128","name":"amountOfShares","type":"uint128"},{"internalType":"uint16","name":"discount","type":"uint16"}],"name":"previewAssetsOut","outputs":[{"internalType":"uint128","name":"amountOfAssets128","type":"uint128"}],"stateMutability":"view","type":"function"},{"inputs":[{"components":[{"internalType":"uint96","name":"nonce","type":"uint96"},{"internalType":"address","name":"user","type":"address"},{"internalType":"address","name":"assetOut","type":"address"},{"internalType":"uint128","name":"amountOfShares","type":"uint128"},{"internalType":"uint128","name":"amountOfAssets","type":"uint128"},{"internalType":"uint40","name":"creationTime","type":"uint40"},{"internalType":"uint24","name":"secondsToMaturity","type":"uint24"},{"internalType":"uint24","name":"secondsToDeadline","type":"uint24"}],"internalType":"struct BoringOnChainQueue.OnChainWithdraw","name":"oldRequest","type":"tuple"},{"internalType":"uint16","name":"discount","type":"uint16"},{"internalType":"uint24","name":"secondsToDeadline","type":"uint24"}],"name":"replaceOnChainWithdraw","outputs":[{"internalType":"bytes32","name":"oldRequestId","type":"bytes32"},{"internalType":"bytes32","name":"newRequestId","type":"bytes32"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"assetOut","type":"address"},{"internalType":"uint128","name":"amountOfShares","type":"uint128"},{"internalType":"uint16","name":"discount","type":"uint16"},{"internalType":"uint24","name":"secondsToDeadline","type":"uint24"}],"name":"requestOnChainWithdraw","outputs":[{"internalType":"bytes32","name":"requestId","type":"bytes32"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"assetOut","type":"address"},{"internalType":"uint128","name":"amountOfShares","type":"uint128"},{"internalType":"uint16","name":"discount","type":"uint16"},{"internalType":"uint24","name":"secondsToDeadline","type":"uint24"},{"internalType":"uint256","name":"permitDeadline","type":"uint256"},{"internalType":"uint8","name":"v","type":"uint8"},{"internalType":"bytes32","name":"r","type":"bytes32"},{"internalType":"bytes32","name":"s","type":"bytes32"}],"name":"requestOnChainWithdrawWithPermit","outputs":[{"internalType":"bytes32","name":"requestId","type":"bytes32"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"contract ERC20","name":"token","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"},{"internalType":"address","name":"to","type":"address"},{"components":[{"internalType":"uint96","name":"nonce","type":"uint96"},{"internalType":"address","name":"user","type":"address"},{"internalType":"address","name":"assetOut","type":"address"},{"internalType":"uint128","name":"amountOfShares","type":"uint128"},{"internalType":"uint128","name":"amountOfAssets","type":"uint128"},{"internalType":"uint40","name":"creationTime","type":"uint40"},{"internalType":"uint24","name":"secondsToMaturity","type":"uint24"},{"internalType":"uint24","name":"secondsToDeadline","type":"uint24"}],"internalType":"struct BoringOnChainQueue.OnChainWithdraw[]","name":"activeRequests","type":"tuple[]"}],"name":"rescueTokens","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"contract Authority","name":"newAuthority","type":"address"}],"name":"setAuthority","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"assetOut","type":"address"},{"internalType":"uint256","name":"withdrawCapacity","type":"uint256"}],"name":"setWithdrawCapacity","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"components":[{"internalType":"uint96","name":"nonce","type":"uint96"},{"internalType":"address","name":"user","type":"address"},{"internalType":"address","name":"assetOut","type":"address"},{"internalType":"uint128","name":"amountOfShares","type":"uint128"},{"internalType":"uint128","name":"amountOfAssets","type":"uint128"},{"internalType":"uint40","name":"creationTime","type":"uint40"},{"internalType":"uint24","name":"secondsToMaturity","type":"uint24"},{"internalType":"uint24","name":"secondsToDeadline","type":"uint24"}],"internalType":"struct BoringOnChainQueue.OnChainWithdraw[]","name":"requests","type":"tuple[]"},{"internalType":"bytes","name":"solveData","type":"bytes"},{"internalType":"address","name":"solver","type":"address"}],"name":"solveOnChainWithdraws","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"assetOut","type":"address"}],"name":"stopWithdrawsInAsset","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"unpause","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"assetOut","type":"address"},{"internalType":"uint24","name":"secondsToMaturity","type":"uint24"},{"internalType":"uint24","name":"minimumSecondsToDeadline","type":"uint24"},{"internalType":"uint16","name":"minDiscount","type":"uint16"},{"internalType":"uint16","name":"maxDiscount","type":"uint16"},{"internalType":"uint96","name":"minimumShares","type":"uint96"}],"name":"updateWithdrawAsset","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"}],"name":"withdrawAssets","outputs":[{"internalType":"bool","name":"allowWithdraws","type":"bool"},{"internalType":"uint24","name":"secondsToMaturity","type":"uint24"},{"internalType":"uint24","name":"minimumSecondsToDeadline","type":"uint24"},{"internalType":"uint16","name":"minDiscount","type":"uint16"},{"internalType":"uint16","name":"maxDiscount","type":"uint16"},{"internalType":"uint96","name":"minimumShares","type":"uint96"},{"internalType":"uint256","name":"withdrawCapacity","type":"uint256"}],"stateMutability":"view","type":"function"}]

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

0000000000000000000000005f2f11ad8656439d5c14d9b351f8b09cdac2a02d0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000ef417fce1883c6653e7dc6af7c6f85ccde84aa09000000000000000000000000c873f2b7b3ba0a7faa2b56e210e3b965f2b618f5

-----Decoded View---------------
Arg [0] : _owner (address): 0x5F2F11ad8656439d5C14d9B351f8b09cDaC2A02d
Arg [1] : _auth (address): 0x0000000000000000000000000000000000000000
Arg [2] : _boringVault (address): 0xef417FCE1883c6653E7dC6AF7c6F85CCDE84Aa09
Arg [3] : _accountant (address): 0xc873F2b7b3BA0a7faA2B56e210E3B965f2b618f5

-----Encoded View---------------
4 Constructor Arguments found :
Arg [0] : 0000000000000000000000005f2f11ad8656439d5c14d9b351f8b09cdac2a02d
Arg [1] : 0000000000000000000000000000000000000000000000000000000000000000
Arg [2] : 000000000000000000000000ef417fce1883c6653e7dc6af7c6f85ccde84aa09
Arg [3] : 000000000000000000000000c873f2b7b3ba0a7faa2b56e210e3b965f2b618f5